Point	Description
1	**Raytech, V-Kool, and 3M** are known for excellent heat rejection — *only if the products are genuine*. Be cautious of imitation products in the market.<br>• Raytech Official Website<br>• V-Kool Official Website<br>• 3M Local Distributor
2	**Front windscreen films** are crucial. House brands can't match high-performance films like **Raytech Ultra70**, **V-Kool Elite**, or **3M Crystalline 70**.
3	**Avoid house brands**. Visit certified **window film specialist outlets** for trusted advice and proper installation.
4	**Always request a warranty card**. It protects your consumer rights and offers peace of mind after your car tinting investment.

Specification	Value	Description
-------------------------	----------	---------------------------------------------------------------
**VLT (Visible Light Transmission)**	78%	Allows 78% of visible light to pass through — clearer and brighter visibility.
**TSER (Total Solar Energy Rejected)**	63%	Blocks 63% of total solar energy — helps reduce interior heat.
**IR Rejected (Infrared Rejection)**	99%	Blocks 99% of infrared rays — excellent heat insulation.
**UV Rejected (Ultraviolet Rejection)**	99%	Blocks 99% of UV rays — protects skin and interior materials.
**Radio Signals Block**	No Block	Does not interfere with radio, GPS, or mobile signals.
**Smart Tags**	Yes	Compatible with electronic toll tags (e.g., SmartTAG, ERP).
**Safety Block Times**	20 times	Can withstand up to 20 hits (impact resistance measure).
**Thickness**	9 mil	Thicker film (9 mil) provides added durability and security.
**Heat Dissipation (minutes)**	1	Releases heat quickly within 1 minute — efficient cooling.
**Warranty**	*******10 Years***((((	Manufacturer warranty for 10 years — long-term protection.

LLumar® automotive window tint does a lot more than just give glass a sleek, custom look. The benefits are truly impressive. We use a variety of technologies to fight the sun’s undesirable side effects:




AC that can’t keep up, scorching hot surfaces, eye-irritating glare, and harmful UV ray exposure.


Explore our ceramic, metallized, dyed and clear tint options to find the product that’s right for you. Preview all the available shades with our tint simulator.

What’s on This Page

Ceramic Auto Tint
Metallized Auto Tint
Dyed Auto Tint
Clear Auto Tint

Window Area	Minimum Light Transmission (VLT)	Maximum Tint Darkness
Front Windscreen	70%	30%
Front Side Windows	50%	50%
Rear Side Windows	No limit	Up to 100%
Rear Windscreen	No limit	Up to 100%

V-KOOL is a brand of Eastman Chemical Company, a global specialty chemical company headquartered in Kingsport, Tennessee, USA.


For more information on Eastman Chemical Company, visit www.eastman.com


Company Name RAYTECH FILMS (M) SDN. BHD.
Company Registration No. 1030450M / 201301000613
Nature of Business ENGAGED AS WHOLESALE OF TINTING FILM AND CAR ACCESSORIES
Date of Registration 2013-01-07
State SELANGOR



https://www.raytechfilms.com.my/automobile-film/





The front has 50% light blocking (遮光度), while the sides and rear have 80% light blocking (遮光度).

means

The light transmittance (透光度) is 50% at the front, and 20% on both the sides and the rear.

Window Position	Your Car Setup	Your Transmittance (透光度)	Your Blocking (遮光度)	JPJ Requirement (Min. 透光度)	Compliance
Front Windshield	50% Tint	50%	50%	≥ 70%	❌ Not Compliant
Front Side Windows	20% Tint	20%	80%	≥ 50%	❌ Not Compliant
Rear Side Windows	20% Tint	20%	80%	No restriction	✅ Compliant
Rear Windshield	20% Tint	20%	80%	No restriction	✅ Compliant

RM 600 for whole proton wira


Can last for how long?

This post has been edited by plouffle0789: Jun 22 2025, 11:17 AM

Why pay 600 when you could get it done for under 100 at some roadside stalls

R brand famous for excellent heat rejection? Ffs, pls read my siggy

It's an eyesore to see many car with bubble tint

I wonder if they can it see through those tint

Those cheap brand will become bubble after few months?

Someone put a lighter near my axia hyper gard , the heat causing bubbles. No matter what brand sure can kena sabotage by lighter

Dont cheapskate in tinting. U drive the car almost every day and is good to invest good tint

If rm600 can do for whole proton wira,the quality is very bad?

The uv, the heat, then the bubbles

Rm600 wasted just like that

The Bangla quality tints done for 500 bucks still holding up after 1.5 years. Done at some illegal car accessories shop in TPG. Prices can nego.

i always cringe on the wrong usage of the word "tinted"

i use raytech don't know which film. when buy car SA said want good quality just add rm500 then balance he will add. so i don't know is good or not. so far my car 4 years already still ok. no bubble but i realize the dark tint is getting lighter. shit kena scam owai

How many years can tahan?

The shop said after bubbles,can come back and he will change new one for you

My el-cheapo tinted 7 years liao no bubble.

El cheapo installed from 3M shop got bubble after 6 years for another car.

What car you buy?

Any warranty card?

The tint can deteriorating after years.

honda city....

got warranty card. but in the glovebox i did not check. normally warranty they give how long?

As long as it can last

5 years

3M brand need RM 1800

Other cheap brand need RM 600


But the cheap brand will become thinner and not much function?

lol dont be uninformed consumer and pay 4x for "named brand"

Window Area	Minimum Light Transmission (VLT)	Maximum Tint Darkness
Front Windscreen	70%	30%
Front Side Windows	50%	50%
Rear Side Windows	No limit	Up to 100%
Rear Windscreen	No limit	Up to 100%

Do they follow?

Now outside offer RM 600 for whole car

But 3M need RM 1800 for whole car


Still many japan brand car owner go 3M

Sure have some goods right?

Can you check your tinted company warranty card?

Any terms & condition?

bubble tint ftw...

pay cheap price , get good bubbles

ok later i check. will update back here.

The shop said after bubbles,can come to the shop change wor

Waste of time for unnecessary visit

Yes. Expensive means good.

3M only RM1800 whole car? biar betik

Hamel good

this info no tinted shop tell us 1 lar
expensive or cheap, just depending on where your car park most of the time.
If every day under hot sun, how expensive also will not last long

I’ve tested enough brands, just stick with 3M or V-Kool. You definitely won’t regret. Make sure it’s original and not celup one. Lots of fake around

They can talk this cock cos they know no one will come and change.

Why?


My tinted shop just beside my house..


Walk 2 minutes can reach

Why those cheap brand can offer RM 600 for whole car?


Why 3M need RM 1800++ ?


More tahan?

Because cheap tint comes with cheap glue. So it will damage the rear windscreen heater element when you remove the old tint.

But of cos, if you are ok without the heater element, by all means please do so.

Canny cool
Bought during Groupon era
Still works no bubble

Key is don't turn on defog

Without a heater element, your car’s rear window may fog up in cold or rainy weather, reducing visibility and safety. It won’t clear mist or condensation easily, especially in the morning.


You’ll need to rely on manual cleaning, anti-fog sprays, or wait longer for it to clear. Rear visibility during driving or reversing is affected.


But every car even use 3M brand tinted ,at most can last 8 years only right


So must remove old one and install new one

This post has been edited by plouffle0789: Jun 15 2025, 11:31 AM

Cheap things no good. Good thing no cheap.

Tint got no expiry date. As long as performance ok then can use forever. Depends on you

Because 3M principle staffs and installers get higher pay and comission..

Esp those branded conti. It is like polka dots. So nice.

They're just aluminium plastic sheets of different brands. Yes, only the quantity of fine aluminium powder differs. A 3*layers RM600 film, with 3x of aluminium particles stacked, will win anytime a shitM.

https://www.vitroplus.com/blog/en/window-ti...re-installation

This post has been edited by Atrocious: Jun 15 2025, 12:26 PM

good quality house brand is good enough, and dont go for those creap and crappy rm200 to 300 whole car tints, those are basically just "screen protectors" with no UV or heat rejection

i installed my house brand tint for rm1.2k 5 years ago and now no single bubble have formed, tint is still fine and heat rejection is strong

those rm3k 4k 5k tints are just overpriced tints and heat rejection might even lose to those house brands lol

Ray tech i last time they give 7 years warranty.
Mine 12years ald, still no bubble. But the rear tint inner surface is smeared now after i cleaned it.

Metallic or ceramic as well?

All scam. One tinted can last forever but not come in cheap.

Ceramic not sure, metallic confirmed..

What is 'tinted '?

Just spend 2k recently on tinted brand

I also wonder can last until car sold or not

I drive a volvo, had my tinting done at the same time as coating with Ceramic Pro, it's been 3 years, passengers comment that each time they enter my car in the hot sun it's like going indoors, I don't notice it as much but yeah.

Recently many house own brand tints, just go for RM600-700 nano ceramic tint, good enough
Market is flooding with China made,
Just don't go for dye or metallic, any of those carbon type Rm 200-400. Heat reduction efficiency drop more significantly for these cheaper tint

Mostly 5yrs warranty, after 5-6 yrs change new set

This post has been edited by LA773: Jun 15 2025, 12:58 PM

I paid RM600 for tinting the whole car, but it's too dark. The front is more than 50%, and the sides are also more than 50%.


Is it because it's a cheaper tint, so it doesn't follow the darkness regulations then only they can offer good heat protection?


Compared to brands like 3M that use better materials, they comply with the rules and still offer good heat protection?

This post has been edited by plouffle0789: Jun 15 2025, 01:33 PM

I have used 3M tints for 9 yrs plus. Still good and no bubbles

U sendiri summarise good tint yet cum ask 600 tint ok anot


U ok anot?

What brand? And the tser spec if u have, just want to know.

Should be more worried about air bubbles appearing

USA one?

my llumar already bubble.
raytech some say not good.
so need to go for 3M?

How many years already?


RM 2500 ?

What are the good tint brands?
My tint that came with car already have bubble, looking for tint but no experience in what is good.

7 years.
cannot remember exact price, do it when the car is new. the brochure and warranty card already throw away.

How many years warranty?

My brother already install one RM 600


Never inform me

if im not mistaken, mine is 5 years

up to u,

i did my MPV RM800
i did myvi RM400

u suka want to help tint shop owner fund next vacation

Your RM 800 tint can tahan how many years?

This post has been edited by plouffle0789: Jun 15 2025, 02:50 PM

My waifu using expensive iris pro clear tint, looks good on paper about heat rejections etc but the car still feel like oven, skin still feel the heat.
Meanwhile my hailak standard clear tint heat rejection performs better.

Huper optik.

I only tried 3M so cant comment other brands. Very good heat rejection yet the window not that dark

Dont take raytech, see my siggy. Lj tint.

The only good thing is its already 9 years and still no bubble yet. But heat rejection with tint = without tint

At first 4 years still good heat rejection right?

I mentioned 2-3 times already in this tered to read my siggy, so dont ask stupid question if lazy to read.

3M + good skill = good car tint

https://forum.lowyat.net/index.php?showtopi...post&p=92112658

Raytech:worst car tint ever



Ok

Now I see.

Sorry

searching for 3M then. thank you.

Either 3m or vkool. I just have the impression of vkool is the best. So my next car i gonna go for vkool no matter what.

How much did it cost??

Depends what car lo. Expect rm2k at least for all windows

But sometimes the tint shop also sohai they charge by car model but not how many pieces of windows.

Ferrari with 2 doors cost more than d segment car

I took solar gard for this car.

I have another car 3M crystalline already 5 years still perfect.

Icic. Solargard should be ok i guess, in terms of bubbles. My housemate during working time last time bought a nissan around 12 years ago then come preinstalled with solargard armorcoat, until now still no bubble yo.

iinm, last time vkool very cheap and focus on mass market. now I see many T20 also suggest vkool

Our old Proton tinted bubbles and degraded after all these years under Malaysia weather. When asked around brand shops their sales agents seem want to conclude sales without installation explanation, to me installation and workmanship is important else can DIY. If someone share the installation process I will buy from them.

He will ragret

Depends the car price

Because easy and fast to lost the heat protection ?

Those 3M authorised dealer will explain to you...





This post has been edited by plouffle0789: Jun 15 2025, 10:09 PM

3M, Llumar,V-Kool is belongs to USA company


Vkool also need RM 1800 for all windows right?



And LLumar and V-Kool is belongs to eastman chemical group

This post has been edited by plouffle0789: Jun 15 2025, 10:11 PM

May I know which state?


Johor Seems seldom can see this USA brand

Raytech,3M, Llumar,V-Kool,Solargard



Which brand you would like to recommend?

This post has been edited by plouffle0789: Jun 15 2025, 10:15 PM

Any state also same, as they are panel for certain nissan models that time.

May I know which year nissan have panel witth them?



Nissan Almera?