Here lies another problem. The visible panels (glass/ acrylic?) will have dust particles stuck on it. At least regular case only 1 visible panel to be cleaned. But here there are 2.

Also the top fans should blow out the top. Heat rises up. From they idea to only draw cold air from below and vent it out top side and rear is logical. But the intake is far smaller than originally intended. This case is more like restriction than "Air".

Even the average Invasion H2 does not pretend to be a better case than what it is. 3 fan in front, 2 fan at the back and no rads or fans on top. You can feel air is being pushed out of the top because too much internal pressure from just the 3 front fans. And the rear fan is choking up to pull out the massive air volume.

Now the case you shown has reverse problem.

No, it's something equivalent to tecware forge.

I think this casing is for those that want the 2 pieces of tempered glass but at a cheaper price compares to 011 vision.

This post has been edited by samftrmd: Mar 15 2024, 01:34 PM

I'm not sure will improve the picture quality after cover and screen protector removed? Just the photo right now you take really fell
(死气沉沉) that the only thing i can I tell 😂

I still using 4000d airflow and is very sufficient for me already, top and rear exhaust then 3 front for intake all 6 fan including the CPU are static pressure fan from artic cooling without RGB 😂

This post has been edited by zuozi: Mar 15 2024, 01:39 PM

Top is not necessarily to be outlet only. The cold and hot air ratio is not significant enough for hot air to naturally rise up. And the fan air column would be too strong for that to happen. This is not some air tight wind tunnel structure after all. Dust is a more important problem to tacket. This, I always try to maintain positive air flow. For this case, it only has 3 fans, so I'll put 1 rear outlet, 2 at the side with the top filter moved the the back panel.

This post has been edited by samftrmd: Mar 15 2024, 01:44 PM

I removed the camera screen protector.

I'll stick with my lian li 011 air mini, tqvm

That is a very good casing, if I'm buying a new pc, that might be my choice as well. Just that the fan arrangement is not positive air flow oriented.

This casing is trying to look like 011 vision.

why not pakai lian li . now got new mirror version. and can put in more drives sum more

anyway, one case i wish own one day
is the cooler master haf x
old but very cool to me. like owning a jdm.
maybe for homeserver.

This one abit better now.

For air-coolers still okay lah for water cool this casing definitely not the best choice.

I don't like that casing because it has lots of space to store dust.

Haf 932 😂😂 fucking heavy piece of shit after all HDD and other hardware installed rly CCB heavy

one mans shit another mans treasure

Not meant it lah just during old time half 932 and Cosmo always heavy like fuck, old time mostly HDD setup some of them install 4 HDD+DVD drive overall weight is really fucking heavy lah 😂😂

Example nowadays haf 700 series 14 to 16 RGB fan from a reputable brand you can install all the fan cost here alone can buy a rm 2k GPU already 😂

This post has been edited by zuozi: Mar 15 2024, 02:18 PM

im chill, its more of a want than a need for me.
i would probably use non rgb artic fans anyway.
time to time browse around the net for 5.25 bay mods and adapter for lulz
n i still keep around a crt monitor from the early years just for nostalgia sake.



lately ive been bored with sff builds.
during covid, move house to house to hotel a bit. to justify itx "investment"
now maybe time to swap for an atx system. itx kinda limited.

ts must have done alot of builds. should make museum in pc sub for inspiration.

Waaa CRT... Very long time no see 😂 , then you still remember those fan 80cfm with temperature indicator when start spinning ?

no i have no recollection. i seem to remember all pc parts were plastics and jank during those time. and cgi box art.
then again all pc were prebuild for me, windows me era. plus im on an island.
my uncle was a hardcore broodwar player. so my interest was mostly in games over pc parts that time.
only until mid geforce gtx, i started to begin the pc building side hobby.
the only indicators i remember in my old pcs are
those mini beepers on the motherboard for temps and fail boot
5.25 bays with display to show ur rpm and temps (on one of my seniors system)
like those old car pioneer media player
visualizer mode on windows media player or winamp.
nowadays you can add waifu on your cpu cooler.
those were simpler times. connect jaring, some one on phone marah.

Ahh i see the fan i mentioned i think during year 2k is similar concept hologram clock you can find on Shopee right now but the fan i mentioned is a functional fan can blow air and temperature purpose monitoring too see internal and external temp without need 5.25bay device which too much wiring also annoying 😂😂

I only begin pc things p4/win 98 era only starting playing game, early than that my life still miserable and poor 😂😂

That time not much game i can choose lah WC 3 and SC 1 rts game always failed to vs computer even easy mode i also kena wipe by NPC 😂😂

Then mostly only play jing yong and ro just 24/7 and bot then selling account after specific goal 😂😂