Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed

Outline · [ Standard ] · Linear+

 darkFlash DS900Air

views
     
TSsamftrmd
post Mar 15 2024, 12:46 PM, updated 2y ago

Interface 2037
******
Senior Member
1,774 posts

Joined: Nov 2007
From: Planet Earth
"Luxury" pc chassis
Attached Image

Atx with side 240
Attached Image

Mesh base.
Attached Image

Bottom cover is non-removable fine mesh, there is another solid metal layer inside that is also not removable. Means dust will be trap inside forever.
Attached Image
Attached Image

Single-use tear-off pci cover.
Attached Image

Top side can mount 360, but some longer models might not be able to fit. Some mb that has larger heat spreader on mb voltage control might not fit as well.
Attached Image
Attached Image

2 x 2.5" tray, but only 1 rack provided.
Attached Image

3.5" rack can move forward to accommodate psu cabling.
Attached Image

No usb type c. At least cables are flat type.
Attached Image
Attached Image

A lot of the casing is put together by rivet instead of screws.
Attached Image

3 ARgb fans with molex power. Fan spec unknown. Total 9 fan ports.
Attached Image

Only 2 lines of zip tie hooks.
Attached Image

This post has been edited by samftrmd: Mar 15 2024, 12:52 PM
TSsamftrmd
post Mar 15 2024, 12:54 PM

Interface 2037
******
Senior Member
1,774 posts

Joined: Nov 2007
From: Planet Earth
QUOTE(leftycall9 @ Mar 15 2024, 12:48 PM)
Got other colours?
*
Attached Image
TSsamftrmd
post Mar 15 2024, 12:55 PM

Interface 2037
******
Senior Member
1,774 posts

Joined: Nov 2007
From: Planet Earth
QUOTE(babykon101 @ Mar 15 2024, 12:47 PM)
2024 no usb c? hard mang.
*
QUOTE(Chanwsan @ Mar 15 2024, 12:49 PM)
Luxury chassis without usb c topkek
*
Attached Image
Apparently, there is a typc c variant.
TSsamftrmd
post Mar 15 2024, 01:15 PM

Interface 2037
******
Senior Member
1,774 posts

Joined: Nov 2007
From: Planet Earth
QUOTE(zuozi @ Mar 15 2024, 01:01 PM)
TS get a entry level leica d-lux 7 without need edit for better photo quality please  , all the photo you take making everything
(死气沉沉) 😂 😂
*
I use Samsung A15.
TSsamftrmd
post Mar 15 2024, 01:18 PM

Interface 2037
******
Senior Member
1,774 posts

Joined: Nov 2007
From: Planet Earth
QUOTE(netmatrix @ Mar 15 2024, 01:07 PM)
Wait.... this case SUCKS BALLS!!!

I look at the sales pictures, 3 top fans pull out, 2 side fans pull out, 1 rear fan pull out. So the only source of cool air is from the bottom? Where 1/4 is taken up by power supply, wiring and probably drives?
*
The top has removable dust filter, so if I put fans there, I would let it blow in. The back panel has air vent but no dust filter.
Attached Image
Attached Image
TSsamftrmd
post Mar 15 2024, 01:19 PM

Interface 2037
******
Senior Member
1,774 posts

Joined: Nov 2007
From: Planet Earth
QUOTE(zuozi @ Mar 15 2024, 01:18 PM)
Panasonic Lumix series also have similar quality RM 3.5k can get already the photo quality definitely better than your current phone 😂
*
My phone less than 1500.
If you sponsor I can lar.
TSsamftrmd
post Mar 15 2024, 01:22 PM

Interface 2037
******
Senior Member
1,774 posts

Joined: Nov 2007
From: Planet Earth
Flat cables can help keep everything tidy. Easy to clean dust.
Attached Image
TSsamftrmd
post Mar 15 2024, 01:24 PM

Interface 2037
******
Senior Member
1,774 posts

Joined: Nov 2007
From: Planet Earth
QUOTE(zuozi @ Mar 15 2024, 01:21 PM)
Ask your company sponsor lah 😂 , you told your boss niama i help you free advertising yet you no sponsor me good camera how to improve sale 😂
*
How do you think the quality is bad? Yellowish? Dark? Maybe it's the camera screen protector.
TSsamftrmd
post Mar 15 2024, 01:27 PM

Interface 2037
******
Senior Member
1,774 posts

Joined: Nov 2007
From: Planet Earth
QUOTE(Doomsday @ Mar 15 2024, 01:23 PM)
Looks flimsy
*
The material is metal, not too thin compares to some cheaper tecware brands. Actually kind of strong because of the large amount of rivets and slightly thicker metal.
Attached Image
Attached Image
TSsamftrmd
post Mar 15 2024, 01:31 PM

Interface 2037
******
Senior Member
1,774 posts

Joined: Nov 2007
From: Planet Earth
QUOTE(zuozi @ Mar 15 2024, 01:27 PM)
The photo too much noise i guess? My phone i don't use protector and cover.
*
I see, I'll remove the screen protector than since the phone cover is think enough the not let the camera screen touch desk surface.
TSsamftrmd
post Mar 15 2024, 01:32 PM

Interface 2037
******
Senior Member
1,774 posts

Joined: Nov 2007
From: Planet Earth
QUOTE(Doomsday @ Mar 15 2024, 01:28 PM)
Does it bend without the side panel insrall?
*
No, it's something equivalent to tecware forge.

I think this casing is for those that want the 2 pieces of tempered glass but at a cheaper price compares to 011 vision.

This post has been edited by samftrmd: Mar 15 2024, 01:34 PM
TSsamftrmd
post Mar 15 2024, 01:42 PM

Interface 2037
******
Senior Member
1,774 posts

Joined: Nov 2007
From: Planet Earth
QUOTE(netmatrix @ Mar 15 2024, 01:32 PM)
Here lies another problem. The visible panels (glass/ acrylic?) will have dust particles stuck on it. At least regular case only 1 visible panel to be cleaned. But here there are 2.

Also the top fans should blow out the top. Heat rises up. From they idea to only draw cold air from below and vent it out top side and rear is logical. But the intake is far smaller than originally intended. This case is more like restriction than "Air".  laugh.gif

Even the average Invasion H2 does not pretend to be a better case than what it is. 3 fan in front, 2 fan at the back and no rads or fans on top. You can feel air is being pushed out of the top because too much internal pressure from just the 3 front fans. And the rear fan is choking up to pull out the massive air volume.

Now the case you shown has reverse problem.
*
Top is not necessarily to be outlet only. The cold and hot air ratio is not significant enough for hot air to naturally rise up. And the fan air column would be too strong for that to happen. This is not some air tight wind tunnel structure after all. Dust is a more important problem to tacket. This, I always try to maintain positive air flow. For this case, it only has 3 fans, so I'll put 1 rear outlet, 2 at the side with the top filter moved the the back panel.

This post has been edited by samftrmd: Mar 15 2024, 01:44 PM
TSsamftrmd
post Mar 15 2024, 01:47 PM

Interface 2037
******
Senior Member
1,774 posts

Joined: Nov 2007
From: Planet Earth
QUOTE(zuozi @ Mar 15 2024, 01:35 PM)
I'm not sure will improve the picture quality after cover and screen protector removed? Just the photo right now you take really fell
(死气沉沉) that the only thing i can I tell 😂
*
Attached Image
I removed the camera screen protector.
TSsamftrmd
post Mar 15 2024, 01:51 PM

Interface 2037
******
Senior Member
1,774 posts

Joined: Nov 2007
From: Planet Earth
QUOTE(zuozi @ Mar 15 2024, 01:38 PM)
I still using 4000d airflow and is very sufficient for me already, top and rear exhaust then 3 front for intake all 6 fan including the CPU are static pressure fan from artic cooling without RGB 😂
*
That is a very good casing, if I'm buying a new pc, that might be my choice as well. Just that the fan arrangement is not positive air flow oriented.
TSsamftrmd
post Mar 15 2024, 01:52 PM

Interface 2037
******
Senior Member
1,774 posts

Joined: Nov 2007
From: Planet Earth
QUOTE(porselinaheart @ Mar 15 2024, 01:50 PM)
I'll stick with my lian li 011 air mini, tqvm
*
This casing is trying to look like 011 vision.
TSsamftrmd
post Mar 15 2024, 02:00 PM

Interface 2037
******
Senior Member
1,774 posts

Joined: Nov 2007
From: Planet Earth
QUOTE(Blinklime @ Mar 15 2024, 01:54 PM)
why not pakai lian li .  now got new mirror version.  and can put in more drives sum more

anyway, one case i wish own one day
is the cooler master haf x
old but very cool to me. like owning a jdm.
maybe for homeserver.
*
I don't like that casing because it has lots of space to store dust.
TSsamftrmd
post May 4 2024, 09:58 AM

Interface 2037
******
Senior Member
1,774 posts

Joined: Nov 2007
From: Planet Earth
Attached Image
Another build with aio,
This is a negative airflow pressure as there are more exhaust than intake.

One thing to take note is that it will be easier to plug in all top side cables to the mb before mounting the aio.

This post has been edited by samftrmd: May 4 2024, 10:07 AM
« Next Oldest · Hardware · Next Newest »
 

Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0183sec    1.28    7 queries    GZIP Disabled
Time is now: 23rd December 2025 - 07:16 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.