Anyone else using Celcom Home Fiber?

Quick question.. do you guys able to obtain Global IPv6 address?

Don't waste time on ipv6 is still unmature yet. Some ISP have better ipv4 connection then ipv6

No.
Technically you get routed ipv6, but not delegated.
So its only functioning in router. Not in lan.

🤔🤔 ..

We actually who should ask u Mr @h4cker_501 .. 🤔🤔

No problems with Unifi IPv6 here.

No problem with TIME IPv6 and Unifi IPv6 here.

Routing even better with IPv6 enabled.

That is general statement.

U should mention ur router model boh!

My bad for not mentioning the exact model of the router. It is an OEM Model Name:
RN685.

It seemed that even though the router came pre-configured with Celcom Home2 Profile with dual-stack ipv4/ipv6 with ipv6 wan mode set to Stateless Address Auto-Configuration (SLAAC) ...
Celcom is not actually providing true global ipv6 address and instead left me (maybe the rest included) to only just have link-local ipv6 .

This is 2024. All major ISP especially servicing fiber optic should be mandatory to provide ipv6.

This is true..

I have multiple subscriptions of fiber optic at the moment including TM-Unifi.
I have no problem with ipv6 on TM Unifi. packet header transfer way faster with ipv6 and this can also mitigate carrier grade network address translation with ease.
the 128 bit hextets has enormous amount of host spaces to play with for multiple subnets.

This post has been edited by h4cker_501: Jan 14 2024, 02:48 PM

I think you're the only who actually answered my question as to have or using celcom home fiber.
thank you for validating.

May I know how do u guys justify getting public ipv6 or not? From router WAN ipv6 or ur LAN clients ipv6?

Hi! yes sure 🙂🎈
as per picture for reference. this is how we breakdown an IPv6 address/

the first hextet is what we call /3 IANA global prefix - followed by /23 regional registry - followed by /32 provider prefix - followed by /48 site prefix - followed by /64 subnet prefix

answering your question..

on our workstation if we do the ipconfig command on windows and failed to obtain/receive an IANA global prefix address of an ipv6.. it means that the router failed to obtain realworld ipv6 from ISP.

normally, anywhere on earth... if we see our ipv6 starts or begins with 2001 .. it means that this ipv6 address is routable across the Wide Area Network otherwise known as the internet.

that is 1% about how to basically understand ipv6 🎈🙂🎈

ISP not assign an address for IPv6 network compare to IPv4. They actually assign a prefix either /48 /56 /64.

Ur router will advertise this prefix on router network where IPv6 enabled clients in the network will receive the advertisement & pick 1 or more addresses & will check to make sure no other clients in the network use those addresses & it's configured. No DHCP required.

Btw if ur pppoe connection is ipv4/ipv6 dua stack, u should have public ipv6 assign for pppoe & router. Check it in router system info. U can try to use build-in to ping ipv6 test site if available.

Ur real problem boh ku is no ipv6 gateway, only ipv4 gateway. Seem ur router not enabled by default the ipv6 gateway. Depend on router brands, in pppoe setting should have options to config ipv6 as default gateway instead of ipv4..and u can laugh. Good luck boh!

I am afraid that is the case..
my OEM router is provided by Celcom

Can u share the page when ip version set to ipv4/ipv6?

Forgot to mention ipv4/ipv6 dual stack router need DS-Lite B4 ipv6 address to connect to internet


IPV4/IPV6 Dual-Stack (avoid dual stack wtf routers).

1) PPPOE set ipv6 only.
2) -Set Default Gateway.
-DS-Lite must be enabled.
-Manual DS-Lite B4 ip: ipv6 gateway.
3) Save + connect.
4) Check ipv6 internet for ipv6 address using devices ie phone.
5) Now ur router clients has own Public ipv6. No more share router Public ipv4.
6) Set PPPOE back to ipv4/ipv6.

Just for ur reference:
https://www.celcom.com.my/sites/default/fil...lines-RN685.pdf

This post has been edited by msrazi: Jan 17 2024, 01:20 AM

I really wish Celcom was better. This is really disapointing. I will be moving back to TM Unifi when I get the chance

ran a proxy on the router and connect to it, able to use IPv6 on Celcom. still cannot figure out how to get it delegated to local clients.

Not sure if Celcom changed anything. all my local devices are able to get ipv6 GUA now

Hi, do you @papyrous mind sharing your setup and config e.g. what router and configuration? I’m also a Celcom home fiber subscriber. Besides seeing an IPv6 address on the WAN port of the router, the devices in LAN are not getting IPv6 addresses.

Thanks.

Update…

Since I’ve no more contract with Digi, current package is 500mbps @ $149, tried to downgrade since I don’t need that speed, was told I won’t get the 6 mths rebate unless I terminate. Hence I send to terminate it yesterday and today a lady called to counter offer.

500mbps @ $79 per mth, 2 yrs pricing with no contract!! !

Is celcom rollout their ipv6 today or something?

I’m having difficulties connecting to local server and tailscale. Apt to cloudflare keep on using ipv6 server

I have same problem...

i think so. some of website cannot load at all. happen today
so far my netflix cannot load, any payment to ipay88 cannot done. some website mcm need double reload baru bole
weird is, celcom mobile okay

This post has been edited by iXora.ix: Aug 4 2025, 09:06 PM

lol, i thought im the only one that could not access to certain websites, it happened since this afternoon and yet still unresolved.... has anyone reached out the their CS ?

This post has been edited by nampaknyahebat: Aug 4 2025, 10:29 PM

Their cs only open 8am till 8pm. Let’s complain until get ticket number, then lodge mcmc

Yel. Since afternoon the internet become funny 🤣

This post has been edited by iXora.ix: Aug 5 2025, 01:32 AM

eh.. same here.. i thought only sabah affected... need to use mobile to login here.. cannot access local server at all.. speedtest.net also cannot.. fast.com, netflix, steam, xbox, all cannot access.. so shit..

ok liao since around 2am just now..

Yep. Around same time its fine. Wondering what happen

Celcom always have issues every now and then. Sometimes it's really slow download, sometimes it's outage, but first time experiencing this. Couldn't game on almost all platform.. steam, epic, xbox.. what a boring night...

But one good thing is, they upgraded my speed free for 2 times, from 300mbps to 500mbps, then 800mbps with 200mbps upload. i'm paying around 130. The reason i'm sticking with them.

This post has been edited by yvliew: Aug 5 2025, 06:36 PM

may i know is anyone able to running ipv6 on celcom fiber? I already raise request to CS twice and they said the ipv6 is up but not getting any Ipv6.

It is my settings correct?

I'm using Openwrt. i set relay mode on all the settings. android able to get ipv6, windows and iOS on and off/takes time

just to update, after twice lodge ticket, they acknowledge celcomdigi did offer ipv6 to customer but it depend on location availability itself.
and pointed that the issue need to be check with their partner isp riding ( in this case Allo) on why ipv6 is not enable on my location)

on my end Celcom does not issue PD. if they do for you then it’s much easier to configure.