That switch to turn on so you can't turn on the car is that switch not turn on izit? Haha.. My last putra got.. But is on clutch. NO step clutch, cannot turn on. hehe.
Taman saga.. My old house they... Now renting.. Haha.
Normal la.. If above 15v, then trouble. Mine also 14.5v.. When you rev your car higher, the voltage will become stronger.. I try with current meter before. Tap on that battery and test. But, if you turn on headlamp, sure will drop to 12 or maybe 13v.

Har? Install volt meter at pillar? Same only.. Tap the red wire follow your start on ignition.. Then black to grounding lor.. Then kau tim.

And that youtube you posted, that is autogauge with opening ceremony. When he turn on, that meter will move one round, then only work..

Subject: Save the environment!!! Save your pocket!!! Petrol Saving Tips�
Someone who has been in petroleum pipeline business for about 31 years and is currently working for the Kinder-Morgan Pipeline in San Jose , CA
wrote the following information:
Here are some tricks to help you get your money's worth.

1. Fill up your car or truck in the morning when the temperature is still cool. Remember that all service stations have their storage tanks buried below ground; and the colder the ground, the denser the gasoline. When it gets warmer gasoline expands, so if you're filling up in the afternoon or in the evening, what should be a gallon is not exactly a gallon. A one-degree rise in temperature is a big deal for businesses, but service stations don't have temperature compensation at their pumps.

2. If a tanker truck is filling the station's tank at the time you want to buy gas, do not fill up; most likely dirt and sludge in the tank is being stirred up when gas is being delivered, and you might be transferring that dirt from the bottom of their tank into your car's tank.

3. Fill up when your gas tank is half-full (or half-empty), because the more gas you have in your tank the less air there is and gasoline evaporates rapidly, especially when it's warm. (Gasoline storage tanks have an internal floating 'roof' membrane to act as a barrier between the gas and the atmosphere, thereby minimizing evaporation.)

4. If you look at the trigger you'll see that it has three delivery settings: slow, medium and high. When you're filling up do not squeeze the trigger of the nozzle to the high setting.

You should be pumping at the slow setting, thereby minimizing vapors created while you are pumping. Hoses at the pump are corrugated; the corrugations act as a return path for vapor recovery from gas that already has been metered. If you are pumping at the high setting, the agitated gasoline contains more vapor, which is being sucked back into the underground tank, so you're getting less gas for your money.

Hope this will help ease your 'pain at the pump'!

steel rims cheaper den those raplica rims right?
use steel rims more tahan right?

ya the nut really ugly red color some more

anyway...where to buy new engine for my old saga(1.3) around malacca

is there any 1.5...sorry noob here

Waaa...all go autogen?
Ermm....

@wkho555
You go too???

-pWs-

here is the proton saga i kiss
paid rm280 for new bumper + mangat repair + paint
sad sad

---

Added on November 1, 2007, 1:53 pm3maxx good as coz no need welding at chasis, some more got 4pts
Ur only got 3points and need to welding
the effect may same, but just welding will make driver feel pain

just my 2cent

Put the metal but no need weld?  Why don't you capture the metal give us see? cause I also got thing that before of custom doing a metal without weld it.  But I dun know got some shop already doing it..

Screw nut at absorber, all the stress was transfer to the absorber. mean, it will make your absorber life span short. While is chasis, the stress is not 100% focus to the absorber.
New car, you should pay for the new bumper geh.. Haha.. =P Luckily his car chasis not senget. last time my cousin wira, kena bang like this, the chasis senget. Damn tulan..

may i know what is fei tai fu..?..until now i am still blur..fei is fllying rite?