Is there anything happen to your hardware or any failure..?

Anyone have tried to OC using FOXCONN 690G motherboard..?

*Foxconn MCP61SM2MA

This post has been edited by ocz: Nov 22 2007, 09:24 PM

Aiya,bro xixo makes me tak sabar la nak get the F3....

Great achievement bro..

@bro dblooi and pws,dont go for penryn la,nnt x best la thread nie..

This post has been edited by ocz: Nov 23 2007, 09:43 PM

I think its not worth.Now,you can get cheap AM2 system with more better performance.

Try to get F3 later,new good OC mobo and a micron rams.

Yup,good,no to intel.
Btw,600+ is almost enough if you only plan to get a mobo,ram and cpu.
Just get 1 1GB stick ram 1st,later you can grab another stick.

Yup,thats rite as what PWS said,get a Biostar TA690G.It wont let you down if youre kaki OC.

*not trying to promote here,but just want to help.

heheh...you can always see my inbox full of poison for F3.

But,the problem is,im still not sure if my ram can do above stock vDIMM,its hot d.

Yup,about the F3,dont worry about the warranty issue,no 1 has ever claimed about it yet so far.Its because it only need stock vcore to achieve 3.01Ghz.

Its cheap bro,250-270 can get new one d.
But,im still noob at this mobo,cant utilize it for its performance.

---

Added on November 23, 2007, 9:50 pmThats what im thinking of,many kaki OC use it.

Im planning to get the thermalright,but the probs is,i dont know wether it can fit both rams im using cuz the its not like INTEL rams slot where those rams have a gap in between.

But,do you guys increased the vdimm more than 2.2v..?

This post has been edited by ocz: Nov 23 2007, 09:50 PM

oic,im not sure whats my crucial's stock vcore.Stated from the website is 2.2v.

In bios is 1.85v and in cpuz is 1.8v.

Dont know which is correct.

---

Added on November 23, 2007, 9:56 pmif your planning to get crucial 10th ann,it only have 667.But its a great ram.

But,IMO,you better get a 6400 (800) due to the price almost the same.I mean not really a huge different in pricing.

This post has been edited by ocz: Nov 23 2007, 09:56 PM

thanx bro,then whats the meaning of tight/loose timing,sorry im so new to this.

1- It would be coz of not the voltage for vdimm and vcore you set in not sufficient.

2- Do you mean ram divider? If you want to find the ram div,Its in the memory clock value.

3- HT link is inside the HT Link Control--->HT Link Frequency---> auto,200,400,600,800 and 1Ghz.Set it to 800Mhz.

Hope it helps.

1- Changing the ram volate is normally safe between 1.8v default and max 2.2v. Above 2.2v,u need at least a passive ram cooler.

2- Allrite,about the ram timings,you can try to use memset 1st,if you find a great timing,then you can change in the bios.

Woot,where all the F3 user go???? There shud be a lot of SS by now.

Coretemp is smart and simple..

Guys,to run F3 above 3.5Ghz need water cooling or not?

Err..I think i using TT 120 or Xigmatek is sufficient to tun 27/7 at 3.5Ghz and above.


Check my sig.

No lah,havent tried yet.No cooler rite now.

Wuhuu...Finally phenom arrived..

Cant wait to see the real deal ( OC )

I think the most practical for daily use is only 3.2Ghz with Air Cooling.

I just realized that 'spider' stock vCore is only 1.2v

sweet.

And the mobo for it also cost about 600-1k+......

So jealous to see you guys test and OC the F3 d. I still cant test it due to no cooler at all. Have to wait till end of this month maybe.

Nvm,i stop OC 1st,finish my casing then OC later.

Also get a ram cooler 1st.

This post has been edited by ocz: Dec 2 2007, 09:43 PM