Outline ·
[ Standard ] ·
Linear+
AMD® Socket-AM2/AM2+ Overclocking thread (V3), Phenom... Here AMD goes
|
tapirus
|
 Dec 1 2007, 05:48 AM
|
|
QUOTE(dreaming @ Dec 1 2007, 12:28 AM) hi guy, just made a quick test on the newly received 3800+ F3 from dblooi. Proc = 3.4Ghz, Ram = 1133Mhz, SuperPi = 25.187s!! will stress test and tweak, tweak, tweak again....  many thx to dblooi...!!  if u can pass super pi 32M..did u want to use this speed 24/7@benchmark only??? |
|
|
|
|
|
tapirus
|
Dec 1 2007, 08:43 PM
|
|
|
arghhhhh...me still stuck...before this i can get 2.9Ghz at stock vocre and 2.3vdimm..pass super pi32M... then i default..try back to 2.9 cannot boot...stable at 2.85 only...even i try rise vcore to 1.30 just for try still cannot boot at 2.9...vdimm 2.3...ram 400 5 5 5 15...where my problem...hope can help me... Attached thumbnail(s)
|
|
|
|
|
|
tapirus
|
Dec 1 2007, 09:09 PM
|
|
|
QUOTE(cyberloner @ Dec 1 2007, 09:05 PM) drop your ht lar bro... 3X or 2X maybe... 570 Chipset HT cannot over 1000 else unstable only 590 can over the 1000 oic...coz i saw sempronic also used mobo like mine..his htt link can go higher than that..ok i will try...TQ bro... |
|
|
|
|
|
tapirus
|
Dec 2 2007, 03:52 AM
|
|
|
QUOTE(CV6149 @ Dec 2 2007, 03:01 AM) huh???? Im using Nforce4 chipset.......1800 is the highest achieved with no impact to stability at all. so what my main prob??still because ram@mymultiplier??? |
|
|
|
|
|
tapirus
|
Dec 2 2007, 04:06 AM
|
|
|
QUOTE(-pWs- @ Dec 2 2007, 04:05 AM) Try others Ram Divider. And play with tRFC and MAL  -pWs-ok2..BTW what tRFC and MAL???    |
|
|
|
|
|
tapirus
|
Dec 2 2007, 01:39 PM
|
|
|
QUOTE(-pWs- @ Dec 2 2007, 04:18 AM) Those are ram timings.  tRFC = Refresh Cycle Time MAL = Max Asynchronous Latency Loosen those 2 options and try again. If you dun mind, post up the Memset screenie here.  -pWs-update my memset ad... QUOTE(alive88 @ Dec 2 2007, 10:51 AM) owh..so only dfi users have it lor?waa..x aci lor abit mobo also got one... QUOTE(DevilMan @ Dec 2 2007, 01:28 PM) wow..u order ur spider d???how much it cost??? This post has been edited by tapirus: Dec 2 2007, 01:45 PM |
|
|
|
|
|
tapirus
|
Dec 2 2007, 01:45 PM
|
|
|
this my memset default... what should i do to tweak it... Attached thumbnail(s)
|
|
|
|
|
|
tapirus
|
Dec 2 2007, 07:26 PM
|
|
|
QUOTE(cyberloner @ Dec 2 2007, 06:20 PM) dun tweak... low your ram multiplier to 400mhz set my divider to 400 d...set command rate to 2T also...then i try oc back...just can get 2.95...when up to 3.0 cannot boot at all..it's my mobo@my ram??? |
|
|
|
|
|
tapirus
|
Dec 2 2007, 09:39 PM
|
|
|
QUOTE(cyberloner @ Dec 2 2007, 08:22 PM) true ... maybe pump more vdimm may help.... i use max vdim already... 2.3... @cschun86 i also suspect my ram..maybe can borrow rainigzero ram for a while....for testing only.. |
|
|
|
|
|
tapirus
|
Dec 3 2007, 10:25 PM
|
|
|
|
|
|
|
|
|
tapirus
|
Dec 3 2007, 10:43 PM
|
|
|
QUOTE(alive88 @ Dec 3 2007, 10:30 PM) bro...why ur super pi 1m 32 only? i think its bcoz of ur ram..make it run faster lorh.. with that timing i dont think that u need to put 2.2vdimm of coz my ram make it slow...can use other divider or not???i just try with that vdim..then decrease it back... |
|
|
|
|
|
tapirus
|
Dec 4 2007, 02:51 PM
|
|
|
u just post where do u like..but give us a link for ur log...both thread can see ur log...
|
|
|
|
|
|
tapirus
|
Dec 5 2007, 12:33 PM
|
|
|
QUOTE(xixo_12 @ Dec 5 2007, 11:16 AM) bored~~~ where is the result??.. too little F3 user show the result they still in progress..once got stable 1 this thread sure will flood..mine OTW... 3.2-3.35 pass super PI 1M at vcore 1.3 vdim 2.2..but all failed super PI 32M(while in progress my pc shutdown.if not sure pass) 3.4GHz Vcore 1.35 Vdim 2.2... will post ss once i got stable... |
|
|
|
|
|
tapirus
|
Dec 5 2007, 01:18 PM
|
|
|
what happen if my pc keep shutdown???when saw temp all ok..cpu and pwm around 40 only..system 36...
|
|
|
|
|
|
tapirus
|
Dec 5 2007, 02:18 PM
|
|
|
QUOTE(-pWs- @ Dec 5 2007, 02:12 PM) Mostly is because of PSU. -pWs-psu???aiya..st56f still not good r...  what make my psu like that??? |
|
|
|
|
|
tapirus
|
Dec 5 2007, 05:01 PM
|
|
|
QUOTE(rainingzero @ Dec 5 2007, 03:06 PM) maybe caused by unstable bios also. try to use diff bios, if u use latest bios, try to reuse older bios. bios which not properly installed will caused stability issue..moreover when u oc ur proc.. yeah, maybe true. but i think his PSU already great enogh for ocing... use old bios.try new bios now..see whether still shutdown@not... @cyberloner i also try to see my pwm..but cannot 24/7 see it  |
|
|
|
|
|
tapirus
|
Dec 5 2007, 11:53 PM
|
|
|
QUOTE(alive88 @ Dec 5 2007, 11:46 PM) arrived already..but my ram not yet arrved..wait 4 my ram first..people who sold me the item didnt online since i bank in the money on last strday who is it??? |
|
|
|
|
|
tapirus
|
Dec 7 2007, 02:55 PM
|
|
|
this mine..not orthos yet.. core speed - 3.35Ghz Vcore - 1.3 Vdim - 2.2 memset 5-5-5-15 2T   please give more advice... |
|
|
|
|
|
tapirus
|
Dec 7 2007, 03:17 PM
|
|
|
QUOTE(hanny562 @ Dec 7 2007, 03:10 PM) how small it is??i still can see... NVM..i upload again.. Attached thumbnail(s)
|
|
|
|
|
|
tapirus
|
Dec 7 2007, 03:47 PM
|
|
|
QUOTE(lohwenli @ Dec 7 2007, 03:35 PM) Its on idle what..already finish 32m superpi, not calculating any more.. mine idle around 38-39..that pic at the same time it finish..dun think sempat cooldown.. load around 44 max...even do orthos also around there... after this try add more vcore...want to see how far it can go..if 3.45 can boot...but not try super pi 32m yet... |
|
|
|
|
Quote
0.0401sec
0.51
7 queries
GZIP Disabled