yeah. My super pi 32M figure is not really what i expected.

Oredi sold one stick of my value ram . Now only working on 1Gb.

Im thinking of buying new ram next month. What do you reckon guys?

If those rams u mentioned same price as value ram, 2molo i buy at lowyat straight away

Lookin at garage sales just now. There's this super talent RAM for sale. Bet it will not be available till next month tho. me sad

haha. what can i do? im only a poor man. stil a student and not working.

Maybe u shud gimme ur corsair perhaps? hahaha

---

Added on December 6, 2007, 12:13 ambased on ur screenshot, i can see that ur using 667 ram. its default timing wud be 5-5-5-15-20. what divider r u using when OC?

This post has been edited by nadeng1987: Dec 6 2007, 12:13 AM

haiya. Ur mobo cannot set ram divider ke? go and change ur mobo perhaps bro ahah jk..
what i mean is your ram divider. is it ddr400 or ddr533 you're using? Bcoz once you increase the fsb, it will also speed up your ram. And first thing u want to avoid if you're using value rams is not to set its speed beyond its limit. So that's the use of the divider. Underclock the ram in order to increase the fsb.

And based on your result here, i suppose you're using amd 6000+. Go and check out ddr2 table in the first page. Look out at 15X multiplier and check out the ram divider's value. Then u can know the speed of your ram.



This post has been edited by nadeng1987: Dec 6 2007, 05:19 AM

The latest would be R69AMB26.BST which is what im using rite now. Go and google this bios. I forgot which website oredi.

if u couldnt find it on the net, just pm me ur email. I'l send u mine.

bro cyberloner,

Is it safe to stress cpu with 1.36V for 24 hours? Is it true that if u prime ur cpu for quite period of time improves its overclockability? U have any sources on these matters?

Dat sounds more like me as well.. ahah..

Thanx for the info mate. Will google bout it soon.

Weeeee~ im getting my super talent PC6400 soon . Cant wait to get it and OC kaw2. Nway guys, any of you ever used supertalent ram B4?

hey guys. Mine to tell me wats the ideal temp for 4000+ brisby under full load?
I OC 2.9Ghz and use it daily. Mine is 49-51 degree range tho when under load. Been using xigmatek s963. Is that temp ok?

For my 2.9Ghz, i didnt add up vcore pon. My proc will only need more vcore when fsb reaches 282.

nway, thanx for the info bro. Now i know my proc is safely OCed.

RECEIVED MY SUPER TALENT AIDY!!

Cant wait to try OC higher. Will post the result rite away.

---

Added on December 10, 2007, 12:30 pmUse TA690G la bro hahah . Good for OC and 'cute' as well

This post has been edited by nadeng1987: Dec 10 2007, 12:30 PM

The only bad thing bout TA690G is cannot drop voltage. Th rest are absolutely hot! Especially fo a m-ATX board.



This post has been edited by nadeng1987: Dec 12 2007, 02:44 AM

Set multiplier to 10 so that it becomes 1:1. Try use DDR400 divider. Set your trfc dimm *0/1/2/3(* the slots u put your ram) to 195 and change MAL value to 10. Start OC back from scratch with this setting. Bout the vcore, ive no idea why i only needed little vcore to push FSB at 310Mhz. Maybe i had better luck than you when getting the proc i guess.

If u use ddr400 divider, at 290Fsb ur ram also wud be at 290Mhz. Stil in its underclocked value since you're using 667 ram. I did not add up any vdimm at all in my OC last time as my ram was running under its recommended speed which was 310Mhz.

Senang cerite mcm ni, if u cant boot after adding up vcore, add up the vdimm. If both add still cannot boot, then u might have reach ur limit. Eventho you're stil might wanna play with chipset voltage plak.
But since our setup is the same mizinvicible(well, now ive changed ram aidy), just stay with your default vdimm. Let see how far u can go.

I did asked kmarc bout vdimm for value ram and he said dont go over 2.1V. U go pass 2.1 then you're taking risk oredi. Nevertheless, by daring to OC you're oredi take risk tho haha

---

Added on December 13, 2007, 12:37 pmhaha.. im no pro.. im still in learning progress.

But i'd never forget you bro xixo_12. You really helped me back then. Appreciated it a lot.

This post has been edited by nadeng1987: Dec 13 2007, 12:37 PM

Guess that's your max stable configuration you can get out of ur system bro. For me to reach 3.1Ghz was just lucky hehe. I got quite a nice proc.

Nway, Congratz for breaking your own result!

---

Added on December 13, 2007, 1:48 pmregarding to bro jeromeccm, i read reviews and posts from other forums regarding OC using biostar mobo. One thing they stress about is DO NOT use biostar overclocking software. They say it's crap and alwez freeze your PC. That exactly what heppened to me b4 when i used that software.

Why dont you use bios instead?

This post has been edited by nadeng1987: Dec 13 2007, 01:48 PM

i cant find rany user from brisbane cores. MOST OF EM ARE F3s!! My super pi 1m could only score 29 seconds at 3.0Ghz and 1000Mhz 4-4-3-8-11. You guys so fast... so jealous..

This post has been edited by nadeng1987: Dec 17 2007, 10:23 AM