will polce tahan or not. =.=
1 pillar how many hole d.

autolite u wan i can get for u..
onli rm50.. double platinum.. improve low end torque
cheap cheap summore.. haha
HPPC is good to enhance of the performance of ur ignition..!

platinum can last longer than copper... better firing as well... but recently i heard that it can overheat quickily as well... thats why i'm gonna try out side-gapped copper plugs... see if its any better than platinum plugs....
denso platinum plugs...

Is time to put in B13 side mirror. Hehe. I will help you look after that motor.. Give me ur number pls. I got, I will contact you. Those mat rempit I don't give a damn on them. last time my friend around 3am at bulatan pahang, kena round up by a group of mat rempit. So he contact me and request for help.. Then I called up all my callmen friend to come help.. My friend arrived at that place and chase those mat rempit with tow car and around 10 cars chasing them too... when those mat rempit see a bunch of people coming down from car holding parang, their di*k kecut like hell.. Luckily my friend not using 3 tow car to block their way. Else, the next day will be the hot new on newspaper.. At last, my friend managed find 2 mat rempit on that incident to lepas their itchy hand... I was on that incident as well...

i wonder wheter we can report to police.. since u got the reg number. Of cos dun expect much... juz wanna make life diff for that arsehole when he wanna renew his insurance or roadtax lol

hello.. i'm new to this thread. i got a 1996 proton iswara. Yesterday, got someone accidentaly crash into my car, bumber and left headlights spolit. Can anyone tell me how much it will cost me to get it fixed? Got to do some survey before sending to workshop. Want to prevent being slaughtered ma. And do you guys having problem with your water tank? mine have to be refilled almost daily Help is much appreciated.

Today go back SC to changed the actuator which control the engine idling.. So I was waiting for my turn since his mech all busying servicing other car.. So I go and chat with the boss itself.. Haha.. Chat until song jor, then the boss said, let him fix my car la.. Haha.. So I see he fixing my car.. After changed, then slowly he help me tune back my car. My car idling now very nice. And I think I dun understand. After he tuned my car, now my car engine getting quiet compare with last time. Now I can hear my muffler bassy sound compare last time.. Wonder what he do.. So while he was busying tuning my car, I go jalan jalan to see those new car waiting for the SC to inspect.. It have several LMST there.. Wah seh.. Luckily we get our car early.. Else, sport muffler pun tak da.. New de LMST using kancil size muffler liao.. And using Good Year decaro GA tire. Luckily it still 14inch.. I believe later on, proton will cut more stuff in LMST.. Hehe.. And the extractor I see is, short de.. not like us using Wise exhaust setting.. And one more thing, all the LMST gear stick I see at the SC, all very long de.. Longer that our gear stick. Dunno why.. So ugly when it longer that the gear cover..

Ducaro Ga and sime tire is abang adik. But Ducaro GA had better grip and work better that Astar lor..

dun like that lar. u looking at my car actually. my car nid go sc retune d coz sometime the rpm will goes high till 1.5. thats y i wan to change exhaust lo. sometime when rev can hear muffler empty sound. but mine is continental tyre. the gear stick wait me hv a chance to try short shifter 1st then onli cansider.
nice mirror. is automatic or manual?

4-1 no wonder pick up like turtle and the sound so loud la...

mind ok ok only is it because 4-1 ?

wei bro you forget i working where meh

you can find me by calling the hot line
turtle sticker look cool

after see wat neosaint99 post about the vacuum gauge. i oledi hv some basic about how to install the gauge. will it be much eazier if i install on pillar? do i nid to cut the pipe if too long?

any1 know how to install volt meter?

outside few inches n inside few inches. when wan change gauge also eazy.
hmmm. now finding some heat resisntent fiber to close the round hole under CAI.

btw is there any clip can replace the air filter clip. coz the original clip will hit under the bar. the other 2 clip is ok.

install the meter nice meh?  ?????
hmmmmm

ok who design the turtle logo

the 3 clip to close the air filter 1. u see my bar then u know. there is a clip under the bar

regarding the stick i love that ZTH design very much hehehehe

spray some WD40 to ur hood lock shd be ok then.. aircon when u 1k service ask them to rectify for u. tell them the blower blows every where and the temp setting is rubbish.. and the air also sucking from outside.. Mine 1 they rectify during my 1 k service jo.. every LMST also same.. 9 out of 10

nice. u extend the wire from original socket?

i saw the the swtich at glemarie proton parts. is actually 3 wire n it will connect to other parts to control vendalation,temp n open pod.
maybe they open up n tighten the wire.

---

Added on October 27, 2007, 3:08 am
icic. but u nid to close up the socket o. like waja ^^

but the thing is after they adjust when i switch it will it loosen again. aiks

---

Added on October 27, 2007, 3:23 amthe socket thing. i rather buy 3 way socket n link the wire inside the original socket. 1 for ionizer, 1 for hp charger, and 1 for front decoration light. any idea for not using 3 way socket?

of coz not gonna plug in there. the 3 way socket can hide at the drawer n wire the cable inside the original socket