after 36000km time to change my pads.

just travel on streets on my naked. so a regular pad will do. not racing type.

any recommendation brand that you guys use?

i checked online - Vesrah. is this any good?

Yes, vesrah is fine or since the oem pads qork for u, u could get that too

But i personally recommend ebc hh sintered pads....damn good even for street use

Would also recommend flushing ur brake fluid at the same time

Agree on the EBC HH pads. Get if if it's available for your bike.

Just look for HH grade pads should be good at the cost of rotor life.
Maintenance include service brakes, lines, fluid, and the disk.

https://idpartsblog.com/2019/04/11/what-do-...n-ratings-mean/

Vesrah have few lines - W, JL, RJL, RJL XX etc
EBC - we only know about HH sintered pads. Some riders don't like this for the dust and noise.
SBS - Recently bought by Brembo. Cheapest sintered pads.
Brembo pads
Nissin pads

What was the LOTR brakepad brand again?

Frodo Baggins?

Ahh... Ferodo.

will sinthered hurt the disk rotor ?

sintered pads are for stainless steel discs only, and modern bikes are equipped with
there are different levels of stainless steel rotors, with OEM being the lowest (generally speaking)
for street use, sintered disc will not wear out rotors significant enough

rotor wear will increase if there are cases of severe pads dragging on rotor, or ride at high level (competition level, trail braking, stunt) etc

cast iron rotors on classic bikes cannot take sintered pads; sintered pads will eat iron rotors within a very short period of use, and in some cases even small stainless rotors - this issue is common on rear disk brakes that switched to sintered pads.

Vesrah is good, sintered, SBS also not bad, for Brembo get the Gold color one not the red, as the Organic red brembo tend to produce excessive dust.

But Vesrah a bit noisy compare to the rest.. but I like to inform others that I am doing braking at that moment.

Vesrah noisy meh? ive only used it for my rear for a short while before swapping out front and rear for EBC....

n the EBC is definitely noisy...but it makes the right kind of noise