I got some questions to my fellow Wira folks:-

1) Where can I buy the leather sleave that covers the bottom of the gear stick shift? I live in PJ, where's the nearest place to get this?

2) What's the re-sale value of my car now? It's a 1999 GLi , manual transmission model?

Owh,u mean the colour diff with ur body colour?

Name added...

ic.. half day enuff d mah..... if send by early morning den afternoon or evening can get back d...

i think the gear console 1 leather is not selling 1.. u nit send to cushion shop custom made it...

i think should be around 10k only...

Ah...i'm about to ask the same question. My gear console fabric faded already.

here i come!!!

ok...continue the oil catch tank talk here...

The OCT is use to trap all the engine oil that is sprayed out from PCV Valve when at high rev. Without OCT, the sprayed out oil will just suck into the inlet manifold then to the combustion. That oil will cause our exhaust to come out with some white smoke when we rev at high rpm and engine also become dirty faster.

For the mini breather filter, we just block the inlet from engine breather hose to the throtle body. This is because the engine breather can also spray out engine oil and suck into throtle body causing sticky throtle and dirty sensors.
Wira especially those with Siemens ECU is very sensitive to dirty sensors. So this OCT and that engine breather mod can helps alot for keeping it cleaner.

Any cheap leather gear knob to recommend?
Mine original proton koyak already
Or pvc is better?

This post has been edited by Azuma-kun: Oct 5 2007, 06:07 PM

U can look at accessory shop wad

1. get a new center console which cost bout 40.....i got my Gti look alike for 50 including labor but the center gear lock gotta take out....if u wan i can send u the photo....

2. i got my second hand wira 99 1.5 EFI manual for 20K......

yea....the skirting look darker a bit....btw my car is maroon....

it took 2 days.....the shop is rushing for raya car.....

Dude post ur gear console pic here.

actually, correction, i think mine is PVC. the PVC is cracking and falling apart. i'm sure someone has this same problem and change it b4. anyone?

wow, darn, i have been over-insuring my wira man

---

Added on October 5, 2007, 6:19 pmu mean u just bought this for 20K?

This post has been edited by kjyow: Oct 5 2007, 06:19 PM

i wanna ask.. how much is a 2nd hand gearbox for my wira.. Satria gearbox or putra gearbox can fit..?

Satria GB sure can fit ler because they also using same engine as Wira
If Putra GB, I don't think u can fit straight, need to change a bit plus if u use a higher cc GB and ur engine is only 1.5, the ratio doesn't tele with ur powerband (assuming urs is a 1.5M)

This post has been edited by shinjite: Oct 5 2007, 06:47 PM

sorry my mistake.. jz now work till blur liao... cod wrong price liao. if 1999 den should at around 20k.

har.. 2 day ar.... i think he do ur car when free la... coz spray skirt very fast only... taken half day to spray n wait i dry... even whole bumper oso taken same time to done...

wat ur car capacity? u hv to get back same capacity g/b.

1. any cushion shop can custom made for you.

2. your car from auto change to manual? got change on the geran or not?

he said 1 day to semen the screw then spray on the next day......

ya jz bought my wira in july 07.......

my gear console

Chaf, where u get ur gear console. This is the one i'm looking for. How much?

i get this for RM50 in penang.....

Halamak jauh nya

What side skirt did u get? Any pic?
Didn't they match the colour with the colour code beneath the hood?

Nice....