i'm not sure if this has been posted before, but here goes :-


How to Check the Firmware Version of iPhone

Apple has introduced a new firmware upgrade 1.1.1 for iPhone which is officially irreversible (although workaround instructions to downgrade to version 1.0.2 has emerged). And once updated, iPhone is uncrackable and thus users can no longer jailbreak or install useful third-party applications or software to iPhone other than the one authorized by Apple. And it's also cannot be hacked to unlock SIM-lock so iPhone can only be used on AT&T cellphone network in US and other Apple's partnered carriers in other countries. In future, all new iPhone models will be sold pre-installed with new firmware 1.1.1 out of the box.

However, there is possibility that some stores may still stock some inventories of iPhone in older firmware version 1.0.x. If you intend to unlock the iPhone for use with carriers other than AT&T or to install third-party native applications and don't want to lose any call functions by downgrading an iPhone that was previously unlocked, it's important to check and verify that the iPhone you're getting is in fact comes with old 1.0.x version of firmware software, and never yet been upgraded before. The checking procedure on iPhone to determine its firmware version is also useful is you decide to buy iPhone on eBay or auctions sites. Normally iPhone firmware version is shown in iTunes after activating and on every successful connecting. The following methods will allow you to check the firmware even before the phone is activated.

How to Check iPhone Firmware from Packaging Box Serial Number

If you want to know your iPhone firmware version without unwrap and open up the package, the serial number of iPhone wrote on a sticker on the box may provide you some hint. In fact, if you order a phone online from Apple, it's possible to see what is your iPhone's serial number when you check your invoice online, even before before the phone arrives at your hand.

A typical iPhone will have a serial number in the following format: 7T727XYZWH8

The serial number is made up of several blocks which have its own meaning, as explain below:

Digits 1 to 3 (7T7) = Year / Batch code
Digits 4 to 5 (27) = Week of manufacture
Digits 6 to 8 (XZY) = Unique identifier part of the S/N
Digits 9 to 11 (WH8) = 8Gb model

The only significant number in the serial ID number to help you guess which firmware version your iPhone has are digit 4 and digit 5, which show week of manufacturing of the iPhone. It has been known that iPhone version 1.1.1. started shipping to customers from week 39 onwards.

So if your 4th and 5th digits in iPhone serial number is less than 39 (38 or lower), it's almost certain that the iPhone as firmware 1.0.2. If the number is greater than 39 (40 and higher), it's also almost certain that the firmware in iPhone will be 1.1.1 or newer, where you probably need to start arranging to return the phone if you're not planning to use the phone on AT&T. Grey area is when the digits is 39, where the iPhone has equal chances to be 1.0.2 or 1.1.1. To actually check the correct firmware version, you have to use other methods listed below.

How to Determine if iPhone is On Firmware version 1.1.1 or Older 1.0.x

If your aim is simply to check and determine whether your iPhone is running on newer version 1.1.1 or older version 1.0.x of firmware, the fastest and easiest method is by holding down the Power (Sleep/Wake) and Home button until iPhone enters restore mode by displaying one of the following image on screen - sync cable and iTunes logo or yellow triangle.

The sync cable and itunes logo is the new firmware 1.1.1. restore screen, while the yellow triangle is the old firmware 1.0.2 restore screen. However, this may change in future firmware upgrade.

How to Check iPhone Firmware Version (Field Test Mode)

Turn on the phone and slide to unlock the keypad. iPhone screen should show that only emergency calls is allowed.
Enter the following key sequence: *3001#12345#* and then finish by pressing Call button. This will enter field test mode of iPhone.
Tap on Versions.
The firmware revision information of iPhone installed out of the box will be shown on LCD screen. The following guide will match the firmware revision to the firmware version.
03.12.06_G - firmware version 1.0.0
03.14.08_G - firmware version 1.0.1 or 1.02
04.01.13_G - firmware version 1.1.1
04.02.04_G - firmware version 1.1.1
*credit goes to http://www.mydigitallife.info


and PHEW! mine was week 37, lucky!

This post has been edited by strayato.hirzaki: Oct 8 2007, 09:33 PM

yeah, I had the same issues as yours while I was desperately wanted to jailbreak + unlock my iPhone. iBrickr just doesn't do for me, no matter how many times I tried. Vista tak boleh, XP pun tak boleh. it just goes stuck at the "iPhone Firmware Download" page. downloaded so many frickin times of 1.0.2 and 1.1.1 firmware also tak jalan, in the end I've managed to find out a quick way to unlock your iPhone in 3 simple steps. hehehe, I'll post everything up once I'm back at home

here's mine with :-

1. Power Support Crystal Film applied
2. Belkin Slim-Fit Case

my apologies for the low-res pics, taken with a stone age camera

hey guys,

i'm doing a bulk for apple accs. so if you guys wanted to lay your hands on the Belkin Slim-Fit Case, now's your chance!

head over to http://forum.lowyat.net/topic/536079