Automatic Gate, How much do you need to install one ?
|
|
 Jul 20 2022, 06:58 AM
Return to original view | Post
#21
|
 
Senior Member
852 posts Joined: Mar 2005 From: Penang  
|
QUOTE(dblcss @ Jul 19 2022, 10:23 PM) If never change backup battery b4 for more then 2-3 years. Then just change the main board then ur system shld be running as normal again. Thanks for the reply. You mean change the back up battery or main board? How to tell if the main board problem or motor problem? |
|
|
|
|
|
Jul 20 2022, 09:56 AM
Return to original view | Post
#22
|
|
Senior Member
852 posts Joined: Mar 2005 From: Penang
|
QUOTE(jimmylim85 @ Jul 20 2022, 09:53 AM) Is your folding gate roller that is sitting on the rail working smoothly? Is there any damage to your DCMotor motor cover (white colour with green lever release). If there is damage in the cover can cause water to enter and damage internal component. The roller is working well as I just change them not long ago. The motor cover also is ok. No damage. |
|
|
Jul 20 2022, 11:33 AM
Return to original view | Post
#23
|
|
Senior Member
852 posts Joined: Mar 2005 From: Penang
|
QUOTE(jimmylim85 @ Jul 20 2022, 09:58 AM) Then the last resort is to get a technician have it check. Probably causes could be 1) wiring issue 2) motor/gearbox 3) main board (which is quite low chances) I suspected motor issue as there is voltage going into the More importantly, are you able to use the release key to manually push the 1 side that fails. motor but motor not moving. I can move the gate by release key. |
|
|
Jul 20 2022, 11:33 AM
Return to original view | Post
#24
|
|
Senior Member
852 posts Joined: Mar 2005 From: Penang
|
QUOTE(jimmylim85 @ Jul 20 2022, 09:58 AM) Then the last resort is to get a technician have it check. Probably causes could be 1) wiring issue 2) motor/gearbox 3) main board (which is quite low chances) I suspected motor issue as there is voltage going into the More importantly, are you able to use the release key to manually push the 1 side that fails. motor but motor not moving. I can move the gate by release key. |
|
|
Jul 21 2022, 07:40 AM
Return to original view | Post
#25
|
|
Senior Member
852 posts Joined: Mar 2005 From: Penang
|
QUOTE(jimmylim85 @ Jul 20 2022, 09:46 PM) Then you just have to get the yellow colour motor module replace to make it work again. Problem solved. Luckily not motor problem. It is the wire joint outside the motor which is corroded. jimmylim85 liked this post
|
|
|
Oct 20 2022, 01:17 PM
Return to original view | IPv6 | Post
#26
|
|
Senior Member
852 posts Joined: Mar 2005 From: Penang
|
DC Moto GSM925W no led status light. Not able to operate autogate. Got voltage from transformer to board. What could be the problem?
|
|
|
Oct 23 2022, 09:53 PM
Return to original view | Post
#27
|
|
Senior Member
852 posts Joined: Mar 2005 From: Penang
|
QUOTE(dblcss @ Oct 23 2022, 09:38 PM) If red led indicator no light mean no power supply from transformer. Can try connect to a new backup to see the board is still working or not. Once connect to backup battery and be able to work then could be transformer is faulty already. U will need to few part to hv std by to replace to test what is wrong. Normally is better to get installer to test because they will hv all the parts on std by to test. Thanks for the help. Confirmed board problem as got dc voltage from transformer. Change the board and everything back to normal. |
| Change to: |  0.0938sec
 0.43
 7 queries
 GZIP Disabled
Time is now: 12th December 2025 - 12:26 AM |
Quote