I like the colour contrast, reminds me of a modded ferrari man

This post has been edited by quiksilve: Oct 31 2007, 04:17 PM

nice one man . .looks curious

UPDATE ::::

got my PSU from jy14 .. coolermaster real power 450w ..




the package include a PSU power cable, analog meter of power consumption , a 24 to 20 pin connector and a black bezel analog meter replacement

here is how the analog meter looks like .. i changed it to black as my casing is black in colour ..


before i install it to my casing .. of course i start it with sleeving the wire ..
here is some of the photo shot i manage to snap while doing the job ..

started with the Serial ATA cable .. { i break 1 of the ground wire } the thing that looks like fork from black wire ..the fork looks like 3 finger sticking out of the ground{black} wire .. i break 1 of those finger i assume .. but it still can works after i test with my fren pc .. will anything happen later on ? any expert out there can tell me ? btw here's the picture


molex,4pin mobo , and 6pin pcie i dint snap photo ..
here is the 24pin which the most difficult for me to remove it from the connector .. very messy



This post has been edited by sheahann: Nov 11 2007, 09:27 PM

finally .. it looks like this in my casing


and with the side panel attached on


here is where the power meter placed {replaced from silver to black colour}


some of the UV effect ...

my question that need helps from forumer ...

i installed a 8cm fan as intake at the front panel area ..

can the HDD fitted in ? bacause the fan take out some space already .. i wonder the HDD can put in and lock or not .. dont have any HDD to try on .. so anyone know ?

another question is .. that i mention earlier .. my psu Serial ATA power cable .. when i sleeving it . i broke 1 of the wire{ground} finger .. err.. the finger i mean is like when i plug the wire out it looks like fork with 3 finger rite ? i broke 1 of that finger of the ground wire .. but i tested on my fren rig .. it still useable and able to detect the HDD connected to it .. so if i carry-on using it .. wll casue anything or not ? thx

here is what i assume as fork with 3 finger ..


This post has been edited by sheahann: Nov 11 2007, 09:24 PM

lol....superior painting skill... 1st time mod casing also can hav a nice result.. ur genius.. haha...

---

Added on November 15, 2007, 7:42 pmas i knoe is.. sata plug onli comes wif 4cable.. my sata plug too.. i think the cable tht u breaked one maybe is an extra.. cant guarantee my words is 100% correct lah..

btw..try to cut off the vinyl of ur side panel.. it is spoiling..

This post has been edited by xiong91: Nov 15 2007, 07:42 PM

cut out the vinyl ? to have full transparent side panel ? hmm. i more like a little bit design on the side ..

---

Added on November 16, 2007, 5:38 pmp/s yalo . how come my sata got 5 wire de ? waht is that orange wire for ?

This post has been edited by sheahann: Nov 16 2007, 05:38 PM

cool dude... Cant wait for the end result.. What hardware r u planning to put in?.. Gonna OC it too ?

i will get my hardware in 2 week time .. still duno either getting E6750 or E6550 .. hmmm.. plan OC graphic only .. processor i dint OC

wow... not bad...i will follow this progress and can't wait for the finish end product...hehe

Nice job so far.Hope to see more out come in future.

i think that guy mean CABLES not WIRES like you mention.may he misunderstood your word.

from my experiences,nothing would happen.but better you changed the pin.only cost u around few cents/ringgit.

This post has been edited by id86: Dec 3 2007, 03:20 AM

my LAST UPDATE ...
picture only ...

This post has been edited by sheahann: Dec 10 2007, 04:25 PM

Hey Dude, your using Galaxy Geforce 8600GE iziit?

yeap ... why ?

it will be more nice if u able hide those cable... anyway good job man

hm.. got think about that .. but if i hide those wire , then what i sleeve all wasted .. and i dont even need to add the UV CCFL if all cable i hide it .. since i bought uv reactive sleeve , no point for me to hide those sleeved wire

look nice. good job bro
Nice painting skill

lolz.. nice one dude.. skills on art.. haha