Who ask you to change at SC? Can get less than 200 outside.

Thanks,
You used DTEC or ATEC line?
200?

TRW ATEC line can setel for rm100 for accord
I would run away ady, unless under warranty I replace lah

Don't go for ferodo, it is very low dust and protect your rotor very well, but it almost have no grip at all once the pad is at higher temperature

Brembo is slightly better than ori brake pad, but don't expect it perform like the high end brembo pad, for normal driving is ok but not for extreme use, even during genting downhill can feel the pad performance degrade once it heat up

You can try look for Remsa pad, previously I use that and it is quiet good in stopping power

That's great since the TRW COTEC is on a higher line than the DTEC iinm.
Cost like rm100 for my car though
The DTEC doesn't accumulate dust or squeals is it?

Oh thanks. The first 2 pedal press is it to get rid of surface rust in the morning? Sometimes if release handbrake and move the car, can hear 'thng' sound when the brake pad releases from the disk.

TRW Ceramic better

Topup abit for Bendix Metal King. Mah Grab driver says it was great for him because last longest. He drove a Myvi tho

But Boy96 says not great for touge

-Great, I'll opt for TRW then, price range around 170-180, just checked from Shopee.
Will send to workshop this weekend which will cost me another RM100 to change the brake pad. hehe

but i thought people say bendix metal king will wear down the disc faster than usual?

Hi guys,
Changing my alza 1st gen rotor and pad

Im comparing between Bosch and TRW rotor and pad.

Is Bosch better? since many fake TRW in market

thats challenging part, i found bosch autopart store in lazada but not  TRW store

Trestor is the same OEM factory as Bendix in Thailand. Not bad for the value they sell, can consider cheaper option for Bendix.

Hi sifus, newb here.

Looking to change my king myvi 1st gen brake disc + pad really soon. Started screeching & previously, mechanic  advised to change disc already (coz not rata & already skimmed before).

Current contenders,
1. Bosch
+official shopee shop
+rm160
+can store pickup
+read somewhere in lyn gooding brand

2. Brembo
+official shopee shop
+rm270
+read in lyn gooding osi

3. trw
+prefered shopee shop (sparepartman)
+rm160
+read in lyn gooding but also to avoid (??)

So sifus, please advise brand to get. Daily 1hr kl driving. Budget 300 max, raya nearing huhu. trusted seller offline/online only pls coz too many fakes now T-T

Thnks in advance:)

i just use FBK brake pad for my acv30 camry , recently changed FBK brake disc rotor and pads

Has anyone tried Works Engineering Ceramic Pads or should I go for TRW DTEC?

Want something better than stock honda and won't makan disk too fast.

https://www.worksengineering.co/collections...5-2013--front--

I was using ori brembo brakepads. A lot of dust and i switched to trw dtec. At first I thought the braking was good because i was not aggressively braking. However when i do test it aggressively, i this dtec felt a bit spongy and braking was not as good as the brembo brakepads.
Now im looking to switch back to either brembo or somethg better with less dust.
Dixcel?