QUOTE(Skylinestar @ Feb 24 2022, 02:51 PM)
hi. how do u control the whether the water only goes to the top rain shower or hand shower? based on the pic below, the valve is a 3 position (top shower - off - hand shower)?
water outlet is from the top mounting point (with red arrow)? the ad says top supply but the pic looks like bottom supply (green arrow).
how do you adjust for clearance because the water supply pipe coming from inside the wall might varies in length?
Water supply at the top but the valve at the button. How does it control the top rain shower? Inside the big support tube, there's a small water tube that goes down, to the valve, and back to the top to the shower?
I don't get it unless both top rain shower and hand shower are both operating together when the hand shower is used, which makes the pressure low.
I have the exact question as you before I purchase the item. Normally the diverter is at the inlet, so you can divert immediately as the water comes in. But it's different with top inlet shower system.
So to answer your questions:
1) Control water using diverter at the bottom: Rain shower - Off - Hand shower
2) The water inlet is at the top (red arrow). Bottom (green arrow) is just the round mounting plate, to screw into wall. But I used liquid nail to avoid potential drilling into water pipe behind the wall
3) I measured and used a faucet extender (10mm extender for my case).
4) Yup, I think that's the case, water from top goes down to the diverter and then if set to RS, then back to the top. I tried dismantling the pipe but couldn't see how it works unless I dissect it. I don't think they are both operating together
Feb 7 2022, 03:46 PM
Quote
0.0194sec
0.85
7 queries
GZIP Disabled