Someone got 600Mbps++ on Celcom 4G...

https://youtu.be/5iQYolkUMuw

I believe this guy has lowyat acc iirc

This post has been edited by luqman98x: Jun 16 2023, 09:21 AM

It should be under Telephony tab > BandMode > choose which SIM slot

To lock to LTE B28 only, untick LTE B1/B3/B7/B8 (Celcom/Digi/Maxis/U Mobile) or LTE B5/B38/B40 (unifi) or LTE B20/38/40/41 (Yes) and tap on "Set" at bottom left. Always remember to "Reset to default" as some phones doesn't reset the lock even after rebooting


Attached thumbnail(s)

Dial *#*#3646633#*#*... Developer Options must be enabled

Some brands like Oppo/realme afaik block this code

Looks like U Mobile using some kind of "Bespoke 5G Coverage Network product" there

I don't think so...

- eNB 7xxxxx = definitely DNB
- B28 LTE on same freq range as DNB one (EARFCN 9310).... if this is U Mobile's own network, why they didn't use their existing LTE B1/3/7/8 as anchor band? That way 5G devices lacking B28 (like chinese variant of Xiaomis) can connect to 5G
- U Mobile are not allowed (yet) to deploy own 5G
- Plus it's covering only their store

That's why I said this is bespoke product from DNB

This post has been edited by luqman98x: Jul 2 2023, 08:54 AM

That app (NSG) always shows "testing", no matter whether the phone & SIM card can connect to particular cell or not

Limited service is there because the phone is connecting to the cell without valid SIM card (in this case not using U Mobile SIM card)


Attached thumbnail(s)

Speaking about Chinese variants..... afaik

Xiaomi = Mix Fold series only, full B28(a/b) support
OnePlus = current Chinese lineups supports LTE B28a only
Oppo = some of the current Chinese lineup has full B28(a/b), some has B28a only
vivo = current Chinese lineups supports LTE B28a only it seems
ulefone = full B28(a/b) support
realme = current Chinese lineups supports B28a only

iinm DNB uses B28a

This post has been edited by luqman98x: Jul 2 2023, 11:05 AM

Tip: You should upload data via "Upload & statistics" menu (sidebar menu, third from top), the upload button is on top right next to 3 dot menu.

Remember to always upload data when you're done mapping.

This post has been edited by luqman98x: Jul 7 2023, 02:06 PM


Attached thumbnail(s)

They did, but to lesser degree (only a handful of sites) and seems limited to Selangor and KL area from what I know