Think you have to use CID 49 method then.

You can actually flash the firmware yourself to the latest one using CID 49 tutorial. If you take to shop, they will charge you for sure.

Just checked your CDA number. It's Vodafone UK CDA. No wonder you can't update using SEUS.

You're welcome mate.
Head on to here
Choose a firmware you like and follow CID 49 guide to mod to CID 51/52 which allow you to mod the menu

I'm using R1JG001.
For your information, the firmware you update to your phone won't let you use SEUS as well because of CDA problem. The firmware from the web is Europe based. I can't get any APAC region firmware for you.
Sorry mate.

Ok. To cut short the story, the link I give you just now are using Europe CDA and not Asia Pacific (APAC) CDA.
I did some google and found APAC CDA for you.
Here is the link here

It's ok. I think you need both FS and main just that I'm not so familiar with firmware flashing. Maybe you need to read the tutorial properly before start because once start you can't stop it.

Best of Luck.

1. Open XS++
2. Press Start
3. You will get some instructions in the left panel
4. Hold "C" on your phone and connect.
if you get "PORT STATUS: ACTIVE" And nothing happens, then unplug phone, remove battery, and insert again. Then try again.
5. Check "Flash Main Firmware"
6. Press the "..." Button, means browse. Find the main file W800_R1BC002_MAIN_EU_EMEA_RED49.bin and click open
7. Now press "Flash"
8. When its done, it will stuck on 291/291, when its on 291/291 then wait 5 seconds, and unplug phone. In XS++ press Close.
9. Now XS++ is closed. Just enter it again. In your phone: remove battery, insert again. Successfully plug your phone to XS++.
10. Now, instead of Checking "Flash main Firmware". Check "Flash File System", Browse the file W800_R1BC002_FS_EU3.fbn and select it, press open. (Means that only Flash File system is checked)
11. Press "Flash"
12. when its done just remove phone from data-cable, remove battery, reinsert. Enter XS++, attach phone.
13. Now you will have to check "Customize File System", use this:

Select Phone model:
W800

Select CDA and Region:
EUROPE_3 (CDA102425/17)

14. Press "Flash"

When its done, Unplug phone, remove battery, insert again. turn on Phone. And congratulations !! Now your phone is a W800i !!!! Enjoy ! laugh.gif

Not really sure but I think so. It's change your firmware so that it will be in CID 51/52.

Try at your own risk tho.