DIY water injection, cleaner engine, better FC and power
DIY water injection, cleaner engine, better FC and power
|
|
Aug 28 2007, 11:23 AM
Return to original view | Post
#1
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,327 posts Joined: Jan 2003 From: Sahara Desert |
have done this before on my carb engine and low end really improves, same method as catacumbs
|
|
|
Aug 29 2007, 12:47 AM
Return to original view | Post
#2
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,327 posts Joined: Jan 2003 From: Sahara Desert |
QUOTE(the_catacombs @ Aug 28 2007, 07:33 PM) unker, my setup same with urs... but why mine tak jadi arr??... is it because ur car running high compression, which causes high engine temp... water vapour helps to absorb heat away and prevents detonation.... mine a bit gila on idling is becos the stone too big hence causing too much vapour but one things for sure, 1 trip to klang and come back kl..half a tank gone...and fc only improves a little, worth da try considering cheap cost in doing it DIY style as for my car, everything stock standard... no detonation or any overheating problem, thats why not much difference.... correct me if wrong unker... |
|
|
Aug 29 2007, 09:04 AM
Return to original view | Post
#3
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,327 posts Joined: Jan 2003 From: Sahara Desert |
QUOTE(the_catacombs @ Aug 29 2007, 02:12 AM) yeap... i notice altering the stone position (high/low) will give u different amount of bubbles, which produce different vapour density... at the end, i got fedup fine tuning the right amount of water vapour.... hahahah... din have da time to put alcohol cos too expensive unker, u tried mixing with alcohol before??... so far i tried pure tap water only.... not much difference... |
| Change to: | 0.0196sec
0.71
7 queries
GZIP Disabled
Time is now: 10th December 2025 - 02:00 PM |