Should HBO go server issue... but i able to access now....
i from 3.45pm try until 4.15pm

Did TM supplied you with TP link AC1200 modem or other model ?

I'm considering to get Unifi soon.

Last few months our home newly installed also like that. I think their database kinda mess-up.

I think you can access the tmadmin section instead of the tmuser

Edited: the way to access tmadmin is the same as tmuser
id: tmadmin pass: Adm@****

That's why. Crappy routers
Also what is the specs of the computer that you use to do the speedtest?
Computers with very slow processor & very slow storage such as HDD won't get you full 800Mb/s

This is my speed on ASUS GT-AC5300 on CAT 7 cable



Below is my speed on Wi-Fi. 15 meter away & behind 2 walls

Sounds like you are using infamous trashcan router (aka DIR-850L), it ran into same limit while I was testing WAN to LAN side on it before (but it was in AP mode, I haven't test on actual Unifi yet)



Mostly consistent here otherwise, also not using stock router. Linksys EA8100.

Don't buy the GT-AC5300, it's an older model
Buy the RT-AX86U instead. Or if you're low on budget, get the RT-AX56U

I've tested the RT-AX56U myself & it can still get full 800Mb/s on CAT7 cable and 600Mb/s on Wi-Fi

I just saw it's not great reputation on here (complain dropouts, bad wifi range) and people nicknaming it trashcan cause it looked like one. Very curious to see how bad it actually was, so I went out and got it, not just one, but two! Also wanted to test bridging between both for future project.

I can't speak on the routing ability of it as I haven't hooked it up to my Unifi yet, but I have been testing it's WiFi capabilities out and it's soso only. It's ideal for apartment but not ideal in house with thick walls, speed drops off compared to C1200 (in same position) which can still deliver decent speed. Might be due to internal vs external antenna, maybe better chipset. Repeater function is fine, but run into AC1200 5Ghz limit.

For the WAN to LAN test in AP mode, might be due to limitation or configuration issue I ran into that limit I mentioned earlier but I noticed if I test LAN to LAN, around usual gigabit speed, so that's good to know. Might test it on Unifi if I can.

All in all, it's fun router to tinker with for project, and still plenty fast for near range AP, or gigabit switch. Just need to readjust expectations

you mean to access via her PC?

i just receive after i submit a request..... they offer me 169 with 300mbps (Free Mesh) as he mentioned.....
I still thinking want or not...

i request yesterday, they call me today 10.00am....

Dont know... maybe i just get my 100mbps 3 month ago....
But 169 still cheap than 199

Oki thanks! At lease cheaper than 199 as no one in my family watch tv nowadays.
Only unifi is available in my area sadly
I still need to wait 2 weeks before i can upgrade 

Oh no… I have CCTV, NAS and a bunch of things port forwarded for public ip. How I am gonna make them work with this?

Another behavior I noticed after moved to private IP with the CGNAT is that my public IP changes from time to time. Not sure about the frequency.

Use Zero-Tier technology.