Slowly slowly it will gone. Its similar like cooking oil. However it will leave a small coating on the rubber to prevent oxidation. What we really want is the chemical to soften back our rubber. So dont wash it immediately after you spray. Leave it on for as long as u can.

Bro Balanced after i changed my steering rack bush to silicone type, ada this squecking noise everytine turn the steering wheel.

Is it silicone type bush is noisier? I feel regret tho. Shud have buy the rubber type

But im not sure if it is the steering column issue but the squecking noise is loud after changing silicone rack bush

Can advise bro?

This post has been edited by clockpulses: Nov 27 2020, 04:43 PM

The two solid bush wont be rubbing anything, so it won't have any sound if its tight and installed properly. Some other problem..wrong installation? Wrong bushing? Or the squecks come from other place.

silicon spray is short term use no?

Nope. Its maintenance item. Prolong your bushings lifespan.
Just take 30 minutes to spray all je for rm15 cost. Spray twice a year enough.

Sorry not silicone. Polyurethane

I just read this



It does more noisier than rubber

This is a fun topic because there are a lot of misconceptions out there regarding polyurethane and squeaking. But before we address those, here are the facts about a rubber bushing regarding the issue. Rubber is chemically bonded with the outer shell. So from the moment you take it out of the box and install the rubber replacement bushing, you don’t have to worry about squeaking. Squeaking occurs when the bushing rubs against metal. Because the rubber is affixed to the metal and can’t move in relation to the metal, there isn’t an opportunity for squeaking.

https://www.suspension.com/blog/rubber-v-po...ings/#squeaking

i prefer at205 la. but much more expensive.

U need to see the application also. For your steering rack bush, it wont cause squeeks. Like the last sentence in your article explains it.

if the bushing already keras, then nothing to lose la.
but i did notice that malaysia rubber lasts very2 long, so changing to cheap oem part is not a bad idea.

This post has been edited by zerorating: Nov 27 2020, 05:01 PM

Lools like i need to go back to the woekshop haih

Ya this also can. But i cant find it..any silicone lubricate is ok la

Bro this one can beat AT 205 or not? Cos this one u can dip any hard rubber n it becomes soft again

This post has been edited by jin^manusia: Nov 27 2020, 05:10 PM

Didnt try before at205 so i dunno. All i know is now no more squeeks on my car so i consider it works at least haha

i've tested silicone spray. cannot tahan long as silicone dries up very fast.

that AT205 i know the chemical composition. but the MOQ is like freaking one big ass tong.
when go service car i ask mech to wipe lower arm with AT205

happens to my old udm last time. even ckd also got this problem.

No la bro. Shopee or lazada ada small bottle but expensive la. About rm80. I still have like a third of bottle left.

Edit: oh macam cant find anymore. I bought once.

This post has been edited by cempedaklife: Nov 27 2020, 05:25 PM

i can order one giant ass tong and sell for 20 for same bottle size la
but it's really tong simen size

Same brand? Do forummer share order then distribute.haha.
All i can say is i put on weather strip at door. Fuuuu. Macam new car sound. Less wind sound

same chemical compound. but it's like super big ass tong.
a lot of hassle somemore have to buy empty bottle, fill and post it out

Oh rm20 per bottle how many ml? Good stuff if really can immediately soften rubber that fast. I wan a few bottles too.