Outline ·
[ Standard ] ·
Linear+
How much can HyperX DDR800 be pushed?, Can it get DDR1000 with longer latency?
|
t3chn0m4nc3r
|
  Aug 18 2007, 01:37 AM
|
|
QUOTE(TheVoIP @ Aug 18 2007, 12:14 AM) Hi, Since normal DDR667 price is high like RM145 per piece, I am wondering if I should get the HyperX series. The question now is value.... With overclockability in mind (motherboard gigabyte P35-DS3), how much can it go? Let's say with longer latency of 5-5-5-15? Hope experinced users can give some lights here... If you found review, please share as well. Thanks for reading...  it depends on wat RAM and wat chipset ur RAM is running on... usually D9, Samsung and Hynix are the best choice... get Crucial from Shawty also not bad... My advice: Don go for Kingston anymore... Kingston can use a walking stick these days...  QUOTE(HaHaNoCluE @ Aug 18 2007, 12:50 AM) i can run my hyper-x ddr800 at 1000mhz with 5-5-5-18 2.3vdimm before i'm running this 24/7 at 2.05V...  |
|
|
|
|
|
t3chn0m4nc3r
|
Aug 19 2007, 09:41 AM
|
|
|
QUOTE(kalakatu @ Aug 19 2007, 05:50 AM) i OCed 2 crucials so far, Ballistik and also Tracer..both gave me DDR1080 5-5-5-12 with only 1.95v  i would like to go higher but sadly i have no ram cooler  my previous XMS2? it was 2.1v for only DDR1000, and ant go further  u sure...? i get DDR1066 @ 5-5-5-20 at 2v...  |
|
|
|
|
|
t3chn0m4nc3r
|
Aug 21 2007, 01:37 AM
|
|
|
QUOTE(kucingfight @ Aug 20 2007, 12:43 PM) Or if u wanna save a couple bucks, get the Normal KVR with Hynix FP-Y5. I've tested them and max OC are : 2.1V, DDR2 1034 5-6-6-12 2.2V, DDR2 1062 5-6-6-12 wow... tat's not saving juz a few bux... tat's half the buck we pay for a HyperX... |
|
|
|
|
|
t3chn0m4nc3r
|
Aug 21 2007, 10:14 AM
|
|
|
QUOTE(bryanyeo87 @ Aug 21 2007, 03:42 AM) personal tests as well patriot value rams @ rm130 1gb each at ALL IT sect 14 last saturday Hynix fpy5 rev C Batch 714AA 1gb x2 with same part number can do ddr 938 5-6-6-18 at stock Volts(1.8v) but apparently rev b can do 5-5-5-15 1t at same speeds...or else u can try to find in LYP for mushkin value rams, with d9 chips of course =) err... i don think Mushkin Value RAMs got D9... at least tat's wat Mushkin told me... it seems tat EM high performance series and above are all D9... |
|
|
|
|
|
t3chn0m4nc3r
|
Aug 21 2007, 11:27 PM
|
|
|
QUOTE(Traveler @ Aug 21 2007, 01:04 PM) Last weekend I bought 2x 1GB of Kingston Value Ram DDR2-800s (without heatspreader). I forgot to check the chips for details before I stuck on some cheap heatspreaders. But I got them to 900 at stock voltage and timings (5-5-5-15) System was a E6550 @3.15GHz (7x450) stock voltage on IP-35 mobo. Hadn't downloaded Orthos yet to do a stability test, but I ran a 10-hour overnight MPEG encoding batch job which maxed out the 2 cores. So I think it's stable enough. Didn't expect the RAM to go so easily to 900 (wasn't originally planning to OC, so I decided not to splurge on RAM), so will be trying for more in the coming days. 1GB kingston RAMs are all either Hynix or Samsung... no need to check... but dunno which chipset model number la...  and 900 is 2 low for u...  This post has been edited by t3chn0m4nc3r: Aug 21 2007, 11:28 PM |
|
|
|
|
|
t3chn0m4nc3r
|
Aug 24 2007, 12:51 AM
|
|
|
QUOTE(bryanyeo87 @ Aug 22 2007, 01:25 PM) no wor...got elpida chips ade, then got kingston stamped chips as well for 1gb sticks leh those are quite rare... the Kingston 1GB RAMs i got are mostly either Hynix or Samsung... now no more d... now Mushkin pulak...  |
|
|
|
|
|
t3chn0m4nc3r
|
Aug 28 2007, 03:52 PM
|
|
|
QUOTE(bryanyeo87 @ Aug 28 2007, 02:55 AM) a little update on it, ddr900mhz 5-5-5-15 1t possible @ 1.8v wow...   |
|
|
|
|
|
t3chn0m4nc3r
|
Aug 29 2007, 08:01 PM
|
|
|
QUOTE(HaHaNoCluE @ Aug 29 2007, 02:32 PM) xms2 has a ddr800 cl4 version if i'm not wrong... but anyway, u might have a different luck... hopefully...  yeah... most probably diff luck...  cuz i still can't get Mushkin XP series... this is wat i got... will try lower latency 2nite... QUOTE(TheVoIP @ Aug 29 2007, 05:09 PM) Actually I am ok if I only let me run at 400Mhz, where I can already overclock my C2D into 2.8GHz at 1:1 without any voltage adjustment. Well, maybe I will overclock the RAM a bit... just to round up the C2D figure into 3.0GHz...  same here...  This post has been edited by t3chn0m4nc3r: Aug 29 2007, 08:06 PM |
|
|
|
|
|
t3chn0m4nc3r
|
Aug 30 2007, 07:06 PM
|
|
|
QUOTE(TheVoIP @ Aug 30 2007, 02:13 PM) Hmmm.. Yet to able to test my new gaming rig... Now what it lacking is the PSU.... Do you think I need 600W+ to push the RAM? Or 400W will do? FYI, I have a 8800GTS 320MB ooo... if ur GC got single 6-pin connector or don have than u can take my Topower(not the Top detergent ) TOP-600-P5 M2 600W PSU...  if u wanna upgrade later on than better take Silverstone OP series 800W... This post has been edited by t3chn0m4nc3r: Aug 30 2007, 07:08 PM |
|
|
|
|
|
t3chn0m4nc3r
|
Sep 1 2007, 03:05 PM
|
|
|
QUOTE(TheVoIP @ Aug 31 2007, 01:53 PM) Never heard of Top le.... Detergent got la... it's Topower...  OEM father of Tagan... http://www.topower.com.tw/This post has been edited by t3chn0m4nc3r: Sep 1 2007, 03:06 PM |
|
|
|
|
Quote
0.0191sec
0.34
6 queries
GZIP Disabled