Unker need a multi monitor setup. Maybe 3 to 4 monitors. How to stack the thing in a 2 x 2 arrangement? Any recommendations.

Also what GPU suitable for 4 monitors? Unker don't need gaming.





[img]https://hackernoon.com/hn-images/1*gRNCnSRrV5JUxbMagFV0CA.jpeg[img]

This post has been edited by NB01: Aug 23 2020, 09:29 PM

Any graphics card that has 4 outputs would work

Get a loctek monitor mount for your setup

3 bawah 1 atas

foursome

1 hdmi

3 dp

double penetra.....

2x2 arrangement? Maybe you could try using VESA mounting? Any gpu would be ok as long as you make sure that it has enough ports for your 3-4 monitors

Almost all GPU will support up to 3 monitors with no problems.
However, there may be limitations with supporting up to 4.
need to check GPU manufacturer website

i use 29" + 27"
good enough d. no need to move neck so often

Like freaking big wor. I don't need so big. I think 24" x 4 will do fine.

Think 4 23" will do fine.

I have 2 27" and it gives me a sore neck and shoulder because of the angles. The 2 23" in my office are much better ergonomically for me.

Thanks for the tip.

What kind of mount should i get? I think this is the part i am most unfamiliar with. All the different mountings. Some seems to stick to tables, some stick to walls?

House using Loctek. Office has ergohuman.

Loctek one just screw on to the table. Seems stable enough for one monitor each stand (I bought single arm stand and added another one later). Haven't tried the multiple arms per stand, so can't comment.

The ergohuman one requires a huge hole to be drilled into the desk. Has two arms for two monitors. Think can add on more arms if you want 4 monitors.

Nvidia RTX 2060 8gb GPU. 3 display port + 1 HDMI.

Vivo vertical quad monitor mount. 4 mon mount.

Man. The 15" + 27+27 at work also leceh wanna move neck at work. Can't imagine 4 full size

2 ultrawide, top and bottom

https://forum.lowyat.net/topic/5009921

You don’t need a GPU with 4 outputs as DP supports daisy chaining. I use a 5700 XT - 2 DP outputs to 6 x 24” screens (so 3 per DP). Of course bandwidth is limited and I’m only running 1080p 60Hz as not for gaming

The stand is free standing or screwed into desk (mine is screwed in)

Got it from these guys :

https://www.antsys.com.my/

Ts consider buy 1x 43 inch monitor 4k? These usually take in 4 inputs.

Save a lot headache.

29" is widescreen

you have to consider vertical height of stacking 2 screen.
need to toggle up/down cause neck pain

get 2 unit 49" inch

Now I am considering 1 ultra widescreen + my existing normal 23".

Just now went to Digital.Mall, not many choices. Mostly 34" only. Got this Gigabyte 34", 144Hz, but expensive. RM 2099.
How do you arrange your monitor? 27 on top, 29 at bottom?

side by side.
if you have too tall screen very hard to utilize the upper and lower part of the screen.

So it's consider 3 screens? 29 (Ultrawide?) + 1 wide screen (27")?

topup a bit get 2x 49" Samsung CHG90

What u gonna do with 4? Most pipu 2 only

I seen Vesa mount for Dell...mahal siot...

Maybe not 4, i think 3 enough for now. Mainly for stock trading.

Unker don't want mahal.

something like that.
my 27" i use it to watch movie, 29" do work

i see, but my desk not that long...don't think can put 27"+29" side by side. Btw, i assume your 29" is thinner than your 27" (height)? Or can they match the size of the height? Otherwise, it would be awkward.

yep 29" is shorter than 27"
i align both at the same top height

For cheaper monitor arms, look for loctek brand buy direct from taobao.

at work i have one of these dell docks which connects to my laptop via usb c or thunderbolt. i only have a triple monitor setup, but i suppose there are are dock models can can have 4

https://www.amazon.com/Dell-452-BCYT-D6000-...B07YHYWN1X?th=1

My 2010 antique HP laptop can 'konek' to 2 external monitor + laptop monitor.

But after i gotten myself a 29" ultrawide monitor, it is all i need.

It can display 3 windows comfortably wide, so no need multiple monitors dy

RTX 3090 TI SLI 4 Way