the technical reason behind for high tyre pressure (290kpa) when we received the car due to consideration the car will stay idle during factory - customer's hand. My X70 had a 2.9 Bar on all 4 tyres when picking it up on day 1. The sticker recommended using 220kpa.

pandai kira komisen enuf/ jump ship other brands since employer dont focus at knowledge as well.
month end numbers talk $$$$

Hahahaha at fb also got people complaint why floor got water. He started his car and turn on aircond idling for 1 hour.

Even claim his proton iriz got no water dripping. 🤣

And others troll until owner koyak.

I also don’t know why is 290 and what is the ideal pressure ?
As in I am no car expert here, any advise ?

I think not everyone know this. I ask around my friend no body knows. Unless the car expert like u ?

Edit: Just notice u do not have the user manual due to Out of stock, how's that even possible, not like the booklet is so high tech that's related to chip shortage 

Umw keep selling cars with their aftermarket hu. Vw keep selling cars without full spec safety aeb. Honda should be ok since keep our market to get best features. Hyundai/Kia send our market with CBU variant, price on high side, no one buy them

OH Dayummm this is spot on, for the sake of reliability and foreseeing hell that might never come.
Then if problem occur with their car "This is wear & tear common one" but if this happen at brand they not familiar with, surely that's quality issue.

BTW do you guys encounter issue with Auto headlamp & Auto wiper turn on itself on a dry hot sunny day?

can confirm, trapo ends up curving after a long period of time
my wife likes it, i dont but what to do
i still prefer maggie coil one

nowdays car use electronic throttle body, electronic gas pedal.
all program to lag to jimat. the best u can do is learn two leg launch with gas & brake on hold

unlike waja is tarik steel cable to pedal

where can get the android auto apk?

Hi I want to ask can we do the 1K KM service after the car millage over 1K ?

Can use for X50 already? Because I see article says for Persona and Iriz only for now

got spotify?

The audio quality is pretty bad over Bluetooth.

I have just come back from Proton COE and managed to speak to 3 experts from the tech dept.
from my understanding throughout the conversation:

1. the x50 dipstick measures the top 1 litre of engine oil. if the dipstick does not show any oil level, it does not mean there isn't any oil in the engine.
2. if engine oil is really insufficient, the red oil sign will be lighted up in the instrument cluster. in this case, then should send the car for further check.
3. in general, turbo engine would consume engine oil and this is normal as long as not too extreme.

masa cornering g-force, oil may lean over one side causing the red teapot sign appear.
dulu my house god car brand kena. vvti also affected
proud to be p1 supporter yess

so we need the 1L of oil as buffer

Well just to add that our Malaysian Volvo XC40 1.5TGDi engine is also using the approximate same vol. and 0W-20 as in the Philippines-Coolray. However I am not too overly concern about the new Petronas 5W-30 oil which is a GF-6A compliant when I am struggling to find any EO in the shell.com.my which have the same new compliant rating. Will test out the new oil soon but I will likely switch back to the 0W-20 EO of my choice after the warranty is over.

What concerns me is most is that some has posted above that the new 5W-30 EO dipstick measurement only have 3 bar instead of the 5 bar that I measured it after my fresh EO change which uses the OW-20. I do measure the EO (@30 min after drive) right after service, after 5k and at 10k before service and so far I have not encountered reduction as such. So the possible reason is that there may be leaks or the new Petronas EO did not fill up to the 5L as bottled. As highlighted in the dipstick 1 bar is the minimum EO required but then the lower EO meaning there could be more deposit built up in the EO in lower vol. and this may not clean the engine as well as possible.

good to know. thanks

Do u guys think that Mysia is the dumping ground for outdated binyue/x50?

thanks mang. will go to proton EON branch this weekend as i want to pay the deposit by credit card.

will opt for open color except for blue and orange..finger crossed will receive before july