Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

Tech Support HELP : Tenda Nova MW3 Mesh Wifi setup problem,, Tenda Nova MW3 + Unifi + 5 port switch

views
     
eclectice
post Jun 7 2020, 08:00 AM

Look at all my stars!!
*******
Senior Member
2,734 posts

Joined: Mar 2008
QUOTE(chrisshim @ Jun 7 2020, 01:32 AM)
HELP !! Cannot get internet from LAN

Bought Tenda Nova MW3 mesh wifi to replace the Unifi router. No problem with wifi but no internet for LAN port due to "ethernet doesn't have a valid IP configuration"

Unifi 30mbps
Modem - (LAN/WAN) Tenda Nova MW3 Mesh - (LAN) - Tenda Gigabyte 5 port switch - (LAN) -CCTV, TV BOX,LAPTOP

Any setting tips to solve this ? I need multiple LAN connection
*
Check the interface's subnet first. The problem normally occurs if you use the static IP address for some of the devices... No issue with devices that uses a dynamic IP address (in this case, WIFI devices since it is rare for the user to use the static IP address on their smartphones when connecting wirelessly, for example). Different routers may use different subnets. For example, DLINK uses 192.168.0.x, ASUS uses 192.168.1.x, etc. Check your router's manual which subnets it uses. You can change this on the router-side or on the device-side...just make sure all devices and the router(s) use the same subnet. In your case, check your laptop's IP address matches the subnet used by your router if it is configured with a static IP address.

This post has been edited by eclectice: Jun 7 2020, 08:10 AM

 

Change to:
| Lo-Fi Version
0.0134sec    0.78    6 queries    GZIP Disabled
Time is now: 18th December 2025 - 10:57 PM