I have the P35-DS3 too, and curious to know how high is your modded vMCH and vFSB?
If you didn't mod the vMCH, how high can you go on the bus speed for this mobo?
Team Xtreem PC8500C5 2 GB Kit torture
|
|
Jul 28 2007, 07:24 AM
Return to original view | Post
#1
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak |
Nice OC!
I have the P35-DS3 too, and curious to know how high is your modded vMCH and vFSB? If you didn't mod the vMCH, how high can you go on the bus speed for this mobo? |
|
|
|
|
|
Jul 28 2007, 01:27 PM
Return to original view | Post
#2
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak |
QUOTE(Lodewijk @ Jul 28 2007, 09:45 AM) vMCH @ 2.0 will start OVP kick, so max vMCH is 1.98 volt, and it give me 550 MHz w/o vMCH mod (but i think it can go more than that). vMCH at 1.98v!!! Do you need to increase the vFSB? I've done some reading and some people say that increasing the vFSB doesn't really help to increase the FSB/bus speed.... |
|
|
Jul 28 2007, 10:55 PM
Return to original view | Post
#3
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak |
@Lodewijk
Question : Do you need to increase your vFSB? Is it important for max FSB? This post has been edited by kmarc: Jul 28 2007, 10:55 PM |
|
|
Jul 29 2007, 08:44 PM
Return to original view | Post
#4
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak |
QUOTE(storm88 @ Jul 29 2007, 08:32 PM) hey hey Team Xtreme rams are comparatively more expensive right? What do you mean when you said 2.45v then 2.6v?u hav typo mistake eh.. 3.5v already kaboom the ram liao lor hehe the rams i tested with was team Xtreme, Micron D9 chipset. was runing at 4-4-4-6 to get 539 (2.45V) Or exact 2.6v at 4-4-4 so far, i found Team Xtreme ram is quite satisfying in KANASAI overclocking method (my own defination What is KANASAI anyway? |
| Change to: | 0.0155sec
0.53
6 queries
GZIP Disabled
Time is now: 1st December 2025 - 08:15 AM |