Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Q6600 Overclock and Temperature

views
     
atomik
post Jul 15 2009, 06:19 PM

Enthusiast
*****
Senior Member
760 posts

Joined: Dec 2008



QUOTE(monsh @ Jul 15 2009, 01:27 PM)
@atomik
y not u post ur setting here ^^,


Added on July 15, 2009, 1:28 pmseems like u need 1.44v to run 3.3ghz >.<"
bad batch of proc ?
*
no no, i only need 1.36v to running on 3.30GHz. just frgt to lower the vcore when doing stability test.

» Click to show Spoiler - click again to hide... «



Added on July 15, 2009, 6:21 pm
QUOTE(Vigilant @ Jul 15 2009, 05:38 PM)
Vcore : 1.5v
Vdimm: 2.2v
NB/SB: 1.3v
FSB:1.4v
Core 1 GTL Ref:0.67*VTT
Core 2 GTL Ref:0.67*VTT
MCH GTL Ref:0.64*VTT
CPU PLL:1.6

I'm not sure about this but temp is the factor my cores fail during prime95 test. I need to let up my casing side window open, or it will rise to 80'c-85'c during prime and fail in few mins.

Its quite stable at 75'c 100% cpu load.

Time for WC maybe...but lazy to setup, I rather have aircond instead laugh.gif
*
WC? looks like ur ready to fork out more money funding the "aircond" haha thumbup.gif

might be a copy cat n thanks for sharing the setting. biggrin.gif

This post has been edited by atomik: Jul 15 2009, 06:21 PM


Attached thumbnail(s)
Attached Image
atomik
post Jul 15 2009, 08:34 PM

Enthusiast
*****
Senior Member
760 posts

Joined: Dec 2008



QUOTE(Vigilant @ Jul 15 2009, 06:45 PM)
Diff mobo, x takut burn lagi ke? If you set your voltages same like mine. Better find those who use same mobo like yours, I thought your mobo better for quad.
*
erm. edy read the XS forum on p45 ud3p thread. n get some ideas to start with. some suggest to reach 3.6GHz need to test 1.5v vcore 1st. then try lowering the vcore until u find the suitable voltage when experience stability. so i come out with this method n any ideas n recommendation are welcome thumbup.gif
atomik
post Jul 15 2009, 09:31 PM

Enthusiast
*****
Senior Member
760 posts

Joined: Dec 2008



1.38v to 1.36v.

ur vdroop sux? if more than 0.05 i think sux kot. cant remember the exact figure. =(


Added on July 15, 2009, 10:20 pmcan i trust IBT porgram? refer my picture past the stability at 3.4GHz with q6600 1.424v gigabyte p45 ud3p bios ver. f8

complete all 20 cycle w/o error. rclxms.gif but the tempt so sexy+hot . sweat.gif

This post has been edited by atomik: Jul 15 2009, 10:22 PM


Attached thumbnail(s)
Attached Image
atomik
post Jul 18 2009, 08:05 PM

Enthusiast
*****
Senior Member
760 posts

Joined: Dec 2008



» Click to show Spoiler - click again to hide... «


@kevink82

how to play with CPU Clock Skew n MCH Clock Skew? i read that by tweaking skew can gain 15%-30% performance.
but i dunno how to start doh.gif


This post has been edited by atomik: Jul 18 2009, 08:06 PM
atomik
post Aug 23 2009, 02:10 AM

Enthusiast
*****
Senior Member
760 posts

Joined: Dec 2008



QUOTE(tech3910 @ Aug 23 2009, 12:39 AM)
i set my vcore @ 1.4, my q6600 temperature shoot up to 90c after 2 loops of IBT.
dats is wen i step in & stop the test.
*
IBT more like killing cpu. mine 20 loops reached 97c. pass it with alot2 of fear.

@faizal,

try play around ur CPU n MCH ref, might help since i tweak it by lowering or up a bit gain some stability. icon_rolleyes.gif

sory for noob help but pros here are welcome to share some info. sweat.gif



 

Change to:
| Lo-Fi Version
0.0170sec    0.36    7 queries    GZIP Disabled
Time is now: 8th December 2025 - 06:42 PM