Dec 30 2020, 09:43 PM
QUOTE(winter01942 @ Dec 30 2020, 08:11 PM)
Just had the same thing happen to my Mikrotik setup as well
From yesterday onwards HyppTV was totally dead, no longer receiving anything from VLAN 600.
(Connection has been sketchy for the whole year, usually needing few resets on the STB to work)
Tried to tinker with the BTU unit but no success, hopefully can get them to come and set up in the same way as yours.
glad I found this information here
From yesterday onwards HyppTV was totally dead, no longer receiving anything from VLAN 600.
(Connection has been sketchy for the whole year, usually needing few resets on the STB to work)
Tried to tinker with the BTU unit but no success, hopefully can get them to come and set up in the same way as yours.
glad I found this information here
QUOTE(soonwai @ Dec 30 2020, 08:49 PM)
Strange that only Mikrotik router users are reporting this. Anyway just fired my STB up and it’s still ok. Last used was a few weeks ago for the last F1 race. I’m using hAP AC2.
QUOTE(ahlong @ Dec 30 2020, 09:02 PM)
Im using hAP AC2 too.. but after STB (hypptv-whitebox) upgrade, its hard to established LAN to 100mbps for the 1st onward STB boot.. iif set auto-nego (everything default on hAP AC2), it only connected to 10mbps.. STB need 100mbps.. if i unset the auto-nego and only select 100M (full), it will retry until can established to 100M.. but it cant for now.. need to cabut lan cable, reconnect just it can success 100M.. reported to TM about this.. they cant proceed to my request like previous user here, direct vlan600 to BTU..
i already test with my previous MikroTik RB951, no problem at all.. happened only with my hAP AC2.. tried check incase the lan port kaput, everything ok connecting with other device..
Wah, I thought me & my friend the only one having VLAN 600 issues with Mikrotik. If you scan the VLAN 600, no packet at all or some tiny meaningless packet once in a while. i already test with my previous MikroTik RB951, no problem at all.. happened only with my hAP AC2.. tried check incase the lan port kaput, everything ok connecting with other device..
It used to work flawlesly. I think something change at the TM back end that cause this issue. Not Mikrotik directly (used to work okay).
Can lodge a report and when their technician come, straight ask to push VLAN 600 to ONU LAN 2. Citing my case, Shah Alam area.
This post has been edited by haturaya: Dec 30 2020, 09:51 PM
Quote
0.0259sec
0.72
7 queries
GZIP Disabled