I installed mine some days ago. Tmax as well.
I am super noob in these things. Normally shops do.it for.me. but this time I did it myself.
Bought from sakurazz.
Some tips received from him
1. Use the stickers cover the speaker grills and mic.
2. Take out spen just in case the glue goes in and fuses it.
Some tips from me myself "failed application". (My sides have problems... didn't stick all the way)
1. Do it in your bathroom after with hot shower running. Reduced dust.
2. When you put it down on the glue, put it REAL REAL REAL slowly.... so that there isn't any bubbles forming in the middle. My mistake was let it drop down and it causes a bubble in the middle,as the glue couldn't spread fast enough. So I peel it up abit and make the bubbles go away. BUT I guess in the process some glue got spilt off the sides and not enough to cover the sides. =(
3. After application. Use alcohol to wipe down the sides. =) it dissolves easily.
4. While using UV to cure, PRESS down on the fingerprint area alternately so that it sticks properly . If not.... say bye bye to.fingerprint.
This is the video I follow.
https://youtu.be/seafPwb7ZQsHopefully it helps =)
Thx bro. I'll try it tomorrow. Lazy today Haha. Got some guide the that suggested user to tape the edge including power buttons to prevent glue from entering