Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed

Outline · [ Standard ] · Linear+

 Digital TV Malaysia v2, Malaysian Digital Terrestrial TV

views
     
pksvince
post Feb 10 2020, 11:23 AM

New Member
*
Newbie
3 posts

Joined: Jun 2014
Hi all,

What is the problems if I switch on the MYTV DVB S2 decoder, it showed the Freeview welcome page and then the green light blinking and it turn off automatically? Press 'ON' from the remote control, it went back on but show 'nothing' on the screen. I did switch off the power of the decoder and switch it back on still facing same faulty occured. Anyone have any idea? I met 3 cases in my kampung with same 'disease' doh.gif

I have extra mytv DVBS2 decoder switched it and it did got signal, but it need to be activated.. How to activate it? I have let it run more than 24hrs still havent activate. I am a guy willing to do DIY before calling the technician.
pksvince
post Feb 10 2020, 04:46 PM

New Member
*
Newbie
3 posts

Joined: Jun 2014
QUOTE(joshhd @ Feb 10 2020, 01:49 PM)
Try unplug all cables from your MYTV hybrid box, except power adapter and HDMI/RCA cable, and see if issue persists.
If issue still persists, then it's likely that there's an issue with the software?
If issue no longer persists, then I suspect is due to short circuit on the wiring to your antenna/satellite dish or something.


Where did you get the MYTV hybrid box?
You get it for free from MYTV because of lower income B40 group? If yes, you got to call MYTV customer service, tell them the box's serial number for them to activate it.
If you buy it from somewhere/some installers, contact that installer or some other authorised installers to help you activate it.

Activation wise is free, no charges. 



Btw, what's the error code shown? Take pic see..



*
If is shortcircuit, can it be repaired? as I noticed that F plug was not in good shape. I have replace the F plug with new one.

Just my thought, is it possible being block by MYTV as all of them been added JCSAT4B TP?

Yes, the decoder is free from the B40 group. I will take a photo of the serial no try and call the customer service as that area have no cellphone coverage, hope the verification IC is not necessary as the unit have been mixed up. Thanks for the tips.

Sorry I didnt take any picture, is E17.

This post has been edited by pksvince: Feb 10 2020, 04:48 PM
pksvince
post Feb 11 2020, 07:51 AM

New Member
*
Newbie
3 posts

Joined: Jun 2014
QUOTE(joshhd @ Feb 10 2020, 06:29 PM)
Try cut off the cable then re-terminate the cable. If the F connector is not in good shape, terminate it with a new F connector.

Not relevant. it is officially confirmed that MYTV uses Asiasat 9 at 122°E, not JCSAT 4B.

If it's free from the B40 one, contact MYTV and tell them the serial number so that they can activate it for you.
No mobile phone coverage? Which area and state is it?
*
Yes, just adjust in between 122°E and 124°E. Asiasat 9 very strong in 1st place. Then add tp for the JCSAT 4B, download channel



user posted image
user posted image

I'm from Sabah. The kampung I stayed during weekend is at Kampung Tambatuon, Kota Belud. Some houses have mobile coverage, some dont as in valley.
« Next Oldest · Home Entertainment · Next Newest »
 

Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0942sec    0.28    7 queries    GZIP Disabled
Time is now: 3rd December 2025 - 08:42 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.