Hi guys, any T-Max tempered glass users here?

Wanna know whether this brand of TG is reliable in term of clarity, durability, fingerprint magnet?

And when it require for replace, will the UV glue easily remove without damage the screen?

Hopefully get some input before deciding of TG brands~

TQVM~

Thanks for the reply, any idea about the respond for ultrasonic fingerprint unlock after installing this TG?

RM85 for 2pc pack, worth to take it?

At least no negative feedback, this is good enough...

Just got my Ringke Fusion clear for N10+ today, seller offer this TG to me, but I still considering cause the stock SP at the N10+ is kinda good quality...

Though my N10+ is still sitting inside my drawer as no time to setup it yet since I got it from 2nd day at the roadshow...

Hi guys, need some suggestion for powerbank?

I have 2 PB (1 samsung & 1 anker, both 10000mah), previously still able to charge my S9+ for 2~2.5 times before need to recharge it.

But recently I notice with my N10+, these 2 PB seems like only able to charge my phone 1 time only.

So I'm thinking to get a 20000mah PB, but have no idea which one to get. I know little bit bout QC3.0, but those terms PD, 18W, 25W, 30W, 45W and so on, I'm kinda confuse...

So super/fast charge for our N10+, is rely on QC3.0, PD, how many W? Anyone mind to briefly explain a bit on these, so that I can decide which PB to get next...

Million thanks in advance~

Thanks for the suggestion...

Actually I am eyeing on this PB as well. "The 15W max due to Samsung PPS charging voltage", are you saying that by using N10+ original cable (USB C to USB C) and put it into this Xiaomi PB USB C port, it only support MAX 15W?

How about the Xiaomi PB bundled cable (USB A to USB C) and uses the other USB A port? Single and/or dual charge at the same time can reach MAX how many W?

Btw, what does the PD 2.0, PD 3.0 actually means? This is also the reason I haven't pull my trigger on this PB yet cause I don't see any PD description on it.

I saw other brands have this "PD" description, and I tried to google the function of it, too bad my understanding is not up to the level yet...

Last but not least, the PB 45W output, what devices can fully utilize it at this point of time? And can this Xiaomi PB use for Huawei/Honor phones that support SuperCharge?

This post has been edited by cskean: Sep 19 2019, 09:32 PM

Gosh, seems like getting more confusing...

So if I wanna get the Xiaomi PB, what else do I need to pair with it, in order to achieve fastest charging speed for using it with my N10+ and recharging the PB?

Xiaomi Mi Powerbank Pro 3

Hi guys, I'm currently using this powerbank with my N10+.

But how come I can't achieve the charging speed like the N10+ original wall charger? From 5% to 100% in around 1hr 10min?

This PB usually shows 1hr 30min+- if I charge from 5% to 100%? And I'm charging my N10+ using the USB C to USB C port from this PB...

Aren't the Type C output suppose to support 45W output?

I'm not hoping to get 452, just that if using Ori N10+ wall charger, it only needs ard 1hr 6m fro 5% ~ 100%.

Strange is when I 1st bought this PB, I tested on the spot it actually can perform almost same lime the Ori wall charger. But after some time, it seems like falling back to those normal fast charge speed only... (which need ard 1hr 30m for the same charging range)