ultra positive air pressure sometime work negatively, beware of that........ u need to make sure that the air exhausted fast enough to get rid of hot air within, if not it will just keep on circulating only.......

speaking or a70 i would love to get that too............ wander if can do reverse ATX on that too.............

sing patriotic song, hehe............if like that i also want to go taiwan liao.......

JAV is cheap and abundant ?? a very good reason i must go there oftenly..........

btw back to topic, it a good idea to use difuser, but the space is quite limited, hard to get it workout........

just an idea while looking at dooms, may be u can make side panel or top panel mod....... just a series of small holes may just make the magic works...but u need a clean drill or cut to get it done, in taiwan i believe u can find someone to do it....this guys are good at fabricating aluminum stuff

hehe get urself a odin first lar........btw cm extreme power might not able to give stable power under heavy loading conditions as it ages.......

lian li can wait, i believe it will be even more beautiful after u have a long long lust and desire for a LL

well open front panel reduce temp dramatically do indicate lack of cold air intake............ it seesm u need to find a way to get more cold air into ur casing..........

hehe sorry for the wrong idea sniper, i tot u set the rear as exhaust.......

well in that case may be u should look for a artic freezer fan or a silverstone fan (those 11 blades 1 i think) which have great pressure as exhaust....... even though the CFM is not strong, it can really pull hot air out n air pass ur hdd......... no need to chop ur BS 03 such a waste..........

anyway just an idea, may be u can opt for a PCI system blower instead if ur pci slot are free, since ur PSU is in front no problem......

paxmate hard chance to find in malaysia, may be u can opte for foam instead, try took at those gasket supplier shop.......

wah it seems those 9 blades fan really work for u sniper......btw sorry for iss info again, 9 blades is the correct 1 not 11 blades (i mix my work with this again.......)

byw yate loon is selling how much in taiwan ? hardly can get it here in malaysia.......

BS05, which casing can fit that ???

RM 760 is ok............ i wander how much A71 would cost, cheaper around RM 660 ?? hehe............ sniper surely very happy to hear that i bet

dunno LL got make side panel for this model or not.........

so i guess those imperfect make a ah lian more desirable perhaps ??

a good 1 minute review, very very informative

btw i didnt notice A10 side panel are folded, i tot it was solid panel..... and i agree on the hdd cage........ i backoff last minute after looking at the cage.......

a70 pretend to tj09, hehe.......nice way to represent it........ but i like the feature.......just which it came with a slideble mobo tray......

v series is around 2.5 ~3 mm thick........ i do notice that and the casing actually relies on the side panel for strength, especially v2000 u can ask hollowbean or irangan about that . The casing it self is not that sturdy enough, but this makes a good clearance room inside the casing for u do do all sort of bla bla thing........

what sniper meant folded is those like normal casing, thin sheet are folded at the edges to make those sliding clip and bla bla whatever, so the closing sound a bit like kancil door get slamp.........

if that the case for A10, i bet a70 and a71 would be the same....a bit of dissapointment......just wish v2000 can mount 6 120mm fans too.....

making a10 into BTX style goin to take quite some efforts and worksmanship.......... it's a bit like sliverstone the rails are made for 1 side only, u need to drill out the rivets and mount it on the other side.......

if my memory serve me rite, there is no pre-drill hole on the other side and u need to make a precision 1 to make the sliding mobo tray works properly.......

btw madman, if u want to elongate A10, it goin to cost a fortune alone just to make the new manufacturing tools........but V1200 and v1000 is different, easily can be done at a lower cost

hehe 9 model i dun think lian li fan will be happy........too little choice for them........... btw miniture difference in mid and low range product often produce very very desirable sales boost in many cases wor.......

madman why the door turn u off, it is really nice.....may be u can even ask uncle ho or bomb man to make a arcylic window on it........

still considers quite ok not that bad............

hehe may be we should start a thread name the truth behind the casing.. or may be x files of cacing

btw TJ09 dust problem will not be very serious, fan filters can do their job perfectly and not too difficult to clean from they it's place........ my Stacker arm with 5 intakes and 2 exhaust (all 120mm fan) dust still manageble..... i clean it like once a month only with tissue wipe hehe......

btw seriously the floor vacuum feature have to be solve if u placing ur casing on the floor......

i think the circle supposed to make it less like a fridge............ saw this a while ago,

but few things really puzzles me, it is worth it to scarifice 3 5.25" bay to mount another 120mm fan on the front worth it ???

and the dual layer design panel stand for what ?? inside hollow 1 ?? and what the heck all their patented BS 02 03 05 semua missing...........

but they done 1 thing rite, top panel can be fully open up........very nice, no need to drill the rivet out to get things done on top panel......

1 bay only, die man.........for i prefer more 5.25" bay like the original stacker, TT kandalg armour or a16 (if not mistaken), then give 3 ex-33, may be with clean front panel....that way if u dun want any bay device u can mount all the hdd u want with fan in front.

if u like u still have lots of space to mount ur favourite I/O panel, thermometers, kama bay and may be reservoir or the whole water cooling unit inside

btw as for the fridge, well not not everyone like that,

n doom i have to agree with u about bs03, but at least leave a room there for u to decide would be better..........

Doom, are u serious bring this to UK........ good luck man........

btw hows the temperature with the VGA block ??


sniper ur dust filter really works wor........... hehe

EX-33 is recommend from me, very satisfy with it..... easy install for both the rack and hdd.......

i assume u meant reverse ATX, v300 i supposed, but the PSU position really gives some troule

wow sorry for wrong info, v600 i mean, must be mabuk already.........hehe

a05 b is cheaper i think if not mistaken........ and better PSU arrange too

i tot uncle like to poison ppl with SS instead ???

ATE can reduce the price abit if u dun want to cooling kit....last i remember v1200b is around RM768 like that,

shawty if u planing to use EX33 to feed cold air for ur graphic card, not a very good idea......

jsut get urself a kama bay, this is much more better