Change engine mount, rubber washer..all fine.

5k settle all la

i think no need that much, around RM3-4k can settle liao.

Might as well sell the car Liao haha

Forgot mention..
The fan also need change since it is 2006.

For better performance.. tayar also change.. then cabin will less sound.

Rev when stationary at N got similar sound?
or only when moving around

sound inconsistent like going through bumps? or consistent frequency sound when moving
most likely less than rm300 can fix if you specifically want to fix that one problem only

Oh ya haven't try rev at N
Tonight after work go back try

When idle no sound
When driving at any speed e.g. 30kph/90kph:
1) No press acc pedal, car still moving, no sound
2) Press acc pedal, sometimes no sound but mostly got sound

The sound seems like window rattling sound
But I tried unwind window one by one still same

This post has been edited by hcmalaya: Jul 15 2019, 01:22 PM

If include radiator fan then maybe need liao. Sekali change all this and problem will be gone.

Change new Myvi lagi best????

Hub bearing

Also ok one, your old myvi can trade in

Aiyo went a workshop quoted rm700
Kena ketuk

Anyone can recommend change engine mounting cheap place in Puchong?

including mounting? or thats just upah pasang?

This post has been edited by kurangak: Jul 21 2019, 06:36 PM

Find those mechanic bawah pokok or petrol station, ask them how much the labour to change it. then buy sendiri the mounting

I checked with local workshop, myvi first gen usually have aircond problem. Last week, my sister myvi car need to change aircond compressor, condensor and others. Burned almost RM2000 to change it.

Include mounting la
700 labour I sure viral kao d Workshop

I drive 2008 Myvi. The last few months have been targetting to change a few things to improve everything this car is at fault. If you never changed anything on the car for 10 years, i can confirm these are the few items that will cause noise.

- Absorber mounting (upper rattling sound, clunking when go over bumps). Replacement about RM200 ish.

- Brake caliper pin (lower mid rattling sound, sound will dissapear if you apply brakes) Replacement depends silicone damped pins, RM20-RM80.

- Engine mounting (mid rattling sound, or clunking when go over bumps) Replacement around =>RM400.

If you can change these 3 things, your Myvi good as new.

This post has been edited by netmatrix: Jul 21 2019, 06:49 PM

It is part true. The air cond is not maintenance free part. You need to pay at least RM700 to do part service that includes cleaning the coil, changing the exchange valve, cleaning the blower, replacing the oil, top up gas, replacing corroded hose and more. It would cost near to RM900-1000 if you opt to change the radiator fan motor & radiator plastic top housing. If your compressor done for, that would definitely cost RM2000. Should do it at around 30-50K mileage.

I tell you what my mechanic told me was true.

- 2006-2012 Myvi all radiator and cooling coil are single fan powered. So if the radiator fan fails, the air cond is at its mercy. You get hot air as first indicator.

- If you change the fan motor, you have to.... I SAY YOU HAVE TO change the plastic radiator top housing. That is also the weakest part of the cooling system. Constant low water in radiator expansion tank is an indicator.

Parking..

That's expensive magnetic clutch. Changed mine for 120. Myvi 2011 lah tapi.

I normally go external workshop rather than perodua's. Last time they told me to repair aircond which costs more than 2k. I sent to external workshop, 120 for that clutch.......