both RAM can be different chips, different speed and different brand, but must same capacity, like 2GB with 2GB, 256 with 256.

m-atx mobo is smaller in size compare to atx mobo, m-atx doesnt hv much pci slot like the atx mobo.

maybe it meant for extreme overclocking.

u better say it wont crack during earthquake

---

Added on April 19, 2008, 11:52 amvista with 2GB RAM r not enough even u hv 9800GX2 or 9800GTX, try use window XP 64 bit with 4GB RAM and u'll get a different result.

so wat u mean is AMD do not perform better in 22"?? i LOLed

and u also mean that every intel processor hv stock OC while AMD cannot be OC?? i seriously ROFLed

This post has been edited by amduser: Apr 19 2008, 11:52 AM

there is never too late.....

but the fact is if u use window XP u can get higher marks in PCmark, coz window XP doesnt take much memory, u try to use window 98, will be more better if it dont hv compatibility issues.

which noise u mean? the noise by ur chrome grill or metal mesh?

if the noise is from the intake fan, u can either lower the fan speed by software or by hardware.

define ur intel mobo with build in AMD card pls

yes, u just need to search for the chipset, chipset correct then ok already.

the link u show us u know need how long to brush it until it become mirror shine? at least an hour or more, depends on ur skill, and ur sandpaper(assume u dont hv any machine to help u, only hand )

u want simple answer??

faster a bit...

A1: if u're using nvidia chipset then i recommend u use nvidia nTune, a software that allow u to oc ur proc in window, the function is depends on how much ur processor support.

A2: i think ur 2x 2GB r not performance RAM, the 2x2GB stated in the pricelist is performance RAM, which will perform a little better than value RAM, but them, the result can be seen in benchmark and OC, if u ask me how to dirrentiate? i dont know, while plying games, not much different.

turbo-cache enabled, many graphic card also like that, especially nvidia GC

silverstone ST56F

but in some cases, ur so called "dark side" r brighter than the "bright side"

i have a question, my modem have a USB plug, something like a round shape USB, and also a network slot and a slot for telephone line.

can i use the USB to replace my network cable? means i connect my modem with my laptop using USB line instead of network cable, can i do that?

-----------------------

another questions, wat's the different between CAT5 and CAT5e? which one r better for normal modem-PC usage? and the cross over cable is CAT wat?

so if i use the USB to connect modem to PC instead of using network cable then i'll need to install the driver?

actually i'va dona a search at the wiki for the CAT5 and CAT5e, but i found their explanation are quite confusing, they just say the CAT5e is the upgrade version of CAT5

wrap in a newspaper, or put the processor back into the box, keep away from contact with water.

for the 2 screen, it's generally called as dual screen/dual monitor, u just need to plug in another monitor to ur graphic card there then adjust some settings inside the window (some might auto config), well, this is just the basic explanation....

for more details, first u need to identify wat's ur graphic card and does it support dual screen (many graphic card support), normally for those new graphic card will have 2 output slot and a S-video, that 2 output slot is either analog or DVI or both DVI or both analog, use a suitable converter if necessary then connect the display cable to your monitor and graphic card....

u can either use 2 graphic card with SLI disable or using 1 grpahic card.

for the internet, i dont think u can get those connection as smooth as what you can get in cyber cafe, i dont think they're using streamyx, they either use T1 or T2 connection or more than 1 streamyx fixed line.

theoretically, the best internet connection is using fixed line connection, because fixed line connection have less inteference and transmit the data at higher speed, but it does have it's downside too, wireless have it's pros and cons either, so choose wisely.

tarik gently, dont use brute force.

should be able, i dont know about SATA, but if IDE HDD then sometime both HDD will conflict and detect either one only.

if u want printer with fax function i think u'll need at least RM400-500, HP brand, other brand i'm not sure.

all in one printer normally can do photostat work.

basically, no, but all the data in ur 40GB HDD will lost, and u need to reformat the HDD and install a OS.

i dont think the motherboard will auto detect it, u can enable and disable the SLI at the nvidia control panel there.

it doesnt matter as long as u get the correct speed for the RAM, lke 667Mhz and 800MHz

then overclock it....

u use wat software to check it? wat's the clock speed when it show at the boot up screen there?