Jan 4 2019, 10:54 PM
QUOTE(willer @ Jan 3 2019, 11:44 PM)
Theoretically my house unit can reach 106344 kbps (Attainable Rate), slightly above 100mbps.
tmr i will goto HQ to ask again....
---------------------------------------------------
from my RG router
---------------------------------------------------
Modulation Type VDSL2
Actual Rate(Up/Down) 9999/43999 kbps
Attainable Rate(Up/Down) 34816/106344 kbps
Noise Margin(Up/Down) 21.8/13 dB
Line Attenuation(Up/Down) 0.2/5.6 dB
Output Power(Up/Down) 9.8/13.6 dBm
Data Path(Up/Down) Interleaved/Interleaved
Interleave Depth(Up/Down) 167/1553
Interleave Delay(Up/Down) 4/7 ms
INP(Up/Down) 2/5.7 symbols
Profile 17a
Showtime Start 189 h 34 min 23 s
LinkEncap G.993.2_Annex_K_PTM
CRC Errors(Up/Down) 0/0
FEC Errors(Up/Down) 0/3273
Unfortunately, 70% likely u will be stuck at 50Mbps package only,tmr i will goto HQ to ask again....
---------------------------------------------------
from my RG router
---------------------------------------------------
Modulation Type VDSL2
Actual Rate(Up/Down) 9999/43999 kbps
Attainable Rate(Up/Down) 34816/106344 kbps
Noise Margin(Up/Down) 21.8/13 dB
Line Attenuation(Up/Down) 0.2/5.6 dB
Output Power(Up/Down) 9.8/13.6 dBm
Data Path(Up/Down) Interleaved/Interleaved
Interleave Depth(Up/Down) 167/1553
Interleave Delay(Up/Down) 4/7 ms
INP(Up/Down) 2/5.7 symbols
Profile 17a
Showtime Start 189 h 34 min 23 s
LinkEncap G.993.2_Annex_K_PTM
CRC Errors(Up/Down) 0/0
FEC Errors(Up/Down) 0/3273
Even though attainable rate shows can over 100Mbps, but raising actual rate might cause unstable vdsl connection
Correct me if im wrong, if that is similar how ADSL works but higher speed
Quote
0.0140sec
0.45
6 queries
GZIP Disabled