ya i also wanna know

c'mon tell us

The canned air can get from Ace hardware. There's 2 brands available locally. Ace brand n Ambersil. Ace is rm20, Ambersil is rm40. I prefer Ambersil as it's twice the size of the Ace, also a lot more air pressure to clean better.
How long it lasts? Loooong time unless u got like Incredible Hulk fingers that simply press the trigger.

This post has been edited by ianho: Jun 10 2007, 02:41 PM

specifically?
the last time i tried finding in mid valley cannot find, maybe i dig not deep enough

ok ok thanks Uncle ... will look for one @ midvalley there.. .

well actually.. to be frank.. when i disassemble completely my casing.. i cn c dust accumulation all around the casing.. but d funny stuff is that.. i dun c any dust accumulation at the PSU fan


This post has been edited by inteluser: Jun 10 2007, 04:46 PM

dat's bcoz ur casing is full of holes la, easy for dusts to get in 360

Cutting the divider plate let the 240 rad fits in really save up lotsa space. but the front cover must do some mod, make it to a mesh hole type like ianho did, really help alot increasing the airflow
Here's a closer look.

yo bro thanks for d input..
now i get the real idea ady.. gotta take out the rack n redo it.. i saw ur pic thinking od doin it.. but dunno how.. nw wit da pic.. i think i noe wut shud b done d..
thanks

This post has been edited by inteluser: Jun 10 2007, 08:55 PM

Ya, dats exactly what I had in mind. Then just add sum ROM slot cover mesh mod like what I did last time n u'll haf lotsa air flow from teh front.

btw uncle.. u noe ar wer cn get those rom slot covers.

if u mean rom slot cover mesh... it's modded ler..
normal ones can get at ATE

if got dis type 1 gud la..

nice front panel all mesh mod all fan into the mesh area

Yeah, more mesh, more dust.

The single slots u can mod like what I did for my V1200 last time. If u want to buy then can get the 3 slot size HDD cage at the bottom of the pix. It's called an EX33. Can get from ATE at about rm150 IIRC. Just remove the HDD cage n u can use just the front plate as an intake plate.

thanks 4 d idea.. but i think i'll try to mod like wut u did b4..

Hehehe. Yeah it'll b much cheaper to mod urself. That EX33 expensive.



This post has been edited by ianho: Jun 11 2007, 06:40 AM

All finished or active worklogs bumped to avoid deletion.

Well after a long while of delay.. finally i've get myself started to cont the mod jobs.
After having the right idea from unc ianho & hollowbean, i finally decided to mod the raddy in front of the rom-bay. after weeks of planning on how to cut.. finally..

The case being wash-out-all-clean after undergoing a rather V-licious makeover - the cutting & filing & sanding jobs.


A lil' peep into the bay that i've cut out.


Goin down under..


Angle from inside the case..


Guess wut.. dis was d front divider tat was cut out.. the left side was cut out using saw till my hand bengkak.. .. then later i gave up n decided to use an angle grinder on the other sides. .


On the other hand.. i had modded my DDC pump top for a better performance.



Lastly.. a teaser of my work area.


This post has been edited by inteluser: Jun 23 2007, 12:33 AM

ohh .. god

there goes the front divider and hdd cage ...

hahaha .. nice mod indeed .... anyway bro the edge cannot sanded down to perfection ? I know there's little room within to work with ...

but it still looks good ....