The main idea of this mod is just to mod my current V1000 Plus II to suit my WC unit..

Gonna start-off with some pic of my casing..

After some deep cleaning of Mr.Dust




well the plan is to hang the raddy on this 120MM fan with a customize fan shroud.. as i still not ready to chop a hole for the tubing to go thru.. i will b using a U-shape alu n cut it to fit my raddy + fan.. teh probs is.. where cn i get it in kajang...

My WC Parts..
Self-Made Reservoir.. Currently still not yet drill any hole..



Swiftech Apogee on the run..




Raddy..
From this..


To this.. Sanded off those paint..


Undercoat with white.. Gonna do more sanding..


Please provide me with lotsa lotsa suggestion n point of view to improve my project..
This project will take a long time to complete.. as i need to plan out everythin properly so that i wun spoilt dis casing..

This post has been edited by inteluser: Jul 8 2007, 08:25 PM

nope selling.. nice case..
btw.. thanks for the tips.. really lotsa ah lian wif water in there..

i wonder y..

thanks man

i wonder y ..

thanks man.. btw.. nice meeting u .. n thanks.. i hope to complete it asap...



This post has been edited by inteluser: Jun 8 2007, 06:11 PM

i need a suggestion here..
i hav 3 way in mind on how to mount the raddy :

1) to mount at the bak of teh 120MM fan holes..
2) to mount above the casing + add on a rad grilzz
3) to mount at the place where the HDD rack is..

if i using mounting opt 1 i need to drill 2 hole at d bak.. end up making the PSU cacat abit.. else if i m using mountin opt 2 i need also to cut out a bigger piece of alu n since my mobo placement is BTX-style.. the raddy placement will disable me to plug in my PCI Tv card.. lastly if i m usin mountin opt 3 i need to mod a HDD cage for 5.25 and if there is future upgrade to the PSU.. e.g like the size of enermax noisetaker 2.. teh raddy will come into the way..

hopefully sum1 out da cn gimme a better suggestion though..
thanks.

a lil update on the HDD mount location. btw.. i hav oledi decided to put d raddy at da ori location of da HDD..
mount it in da 5.25 Bay.. sori bout d blur pic.




This post has been edited by inteluser: Jun 9 2007, 05:55 PM

thanks 4 d complement.. i've tat plan in mind too.. but i'm not tat pro la.. i scare later teh cutting results will really look bad.. btw.. i saw tat idea from hollowbean v2000 wc mod..

hahaha the current 1 is da best i can have..

well actually.. to be frank.. when i disassemble completely my casing.. i cn c dust accumulation all around the casing.. but d funny stuff is that.. i dun c any dust accumulation at the PSU fan


This post has been edited by inteluser: Jun 10 2007, 04:46 PM

yo bro thanks for d input..
now i get the real idea ady.. gotta take out the rack n redo it.. i saw ur pic thinking od doin it.. but dunno how.. nw wit da pic.. i think i noe wut shud b done d..
thanks

This post has been edited by inteluser: Jun 10 2007, 08:55 PM

btw uncle.. u noe ar wer cn get those rom slot covers.

if got dis type 1 gud la..

thanks 4 d idea.. but i think i'll try to mod like wut u did b4..

Well after a long while of delay.. finally i've get myself started to cont the mod jobs.
After having the right idea from unc ianho & hollowbean, i finally decided to mod the raddy in front of the rom-bay. after weeks of planning on how to cut.. finally..

The case being wash-out-all-clean after undergoing a rather V-licious makeover - the cutting & filing & sanding jobs.


A lil' peep into the bay that i've cut out.


Goin down under..


Angle from inside the case..


Guess wut.. dis was d front divider tat was cut out.. the left side was cut out using saw till my hand bengkak.. .. then later i gave up n decided to use an angle grinder on the other sides. .


On the other hand.. i had modded my DDC pump top for a better performance.



Lastly.. a teaser of my work area.


This post has been edited by inteluser: Jun 23 2007, 12:33 AM

thanks bro.. i tried to sand. but it's very hard to get into those edges.
there do hav a lil room but my hand's fat.

resized. Sori

Neway. few more picture updated. thanks

i cut d plate from d front of the rom slot there. whereas i invert d grinder disc to cut d plate tat is joining to d back 1..

lolx.. paiseh2..
hahaha tat is a table or my old skool P3.. since d pc was oledi MIA.. so i use it as my workplace lo..

hehehe.. d reason y i change to a t-line instead of a reservoir becuz i need more room to work with.

cuz if i shorten it the 3/4 tubing at d pump there will kink..
tat d shortest i figured out so that the 3/4 tube wun kink.

uglyvamp. during his last bbs. it's 1/2" OD.