hi all, my condo unit is dual key (2 separate compartments), both areas got their own fibre socket point,

im not familiar with all these, im thinking if i apply already, can i have 1 router for each compartment? so the usage will not be affected by each other, lets say A turn off the router, B still got access to internet because got own router

or can only have 1 main router?

thank you so much!

dual key unit

photo from google search, something like this, but both compartments got their own fibre socket point, so wonder whether each compartment can have their own independent router or there need to have 1 compartment to serve as main router..

yes i only want to apply a single line, if it's 2 isolated cables, can the installer like tapped both cables into 1 port in the "control room"? so like internet coming out from 1 port can supply to 2 separate fibre socket (like electric cable, electricity from a single cable split into 2 cables), then both areas can have their independent modem and router, not affected by each other.

i am not familiar with all these

thank you

ok can understand, thank you very much.

hi guys, currently my unit is using the huawei 2in1 stock router, the signal is terrible in another corner of the unit, planning to buy huawei ax3 quad core to improve the situation.

but currently tenant is staying inside the unit, once i call the cs to change the stock router to bridge mode, would it be changed immediately or within few hours? cause i see previous post stated it may take 2 to 3 days..

once it is on bridge mode means no internet connection right? i am thinking of how to do it so it brings the least inconveniency to my tenants..

any suggestion please? thank you!

i see, so it is actually quite fast, thank you for the info!

hi guys, i see time now giving wifi6 mesh router, is this router anything close to ax3 pro (quad core)? or still ax3 pro is much much better?

This post has been edited by eugenelam85: Mar 15 2022, 04:16 AM

hi bro,

1. i see time now is giving wifi6 mesh router, is this router anything close to ax3 pro (quad core)? or still ax3 pro is much much better?

2. during weekend the cs able to change the 2in1 modem to bridge mode or not?

3. i have the huawei v5 2in1 modem, last time you told me can buy ax3 pro (quad core) to upgrade, so can i check with you the steps stated below are correct or not?

a. connect the ax3 wan with huawei v5 port1
b. then call cs to change v5 to bridge mode
c. only take like 15 minutes to change right?
d. i see the ax3 booklet said go 192.168.3.1 for setting?
e. then key in the pppoe details which can be found in time selfcare? xxx@timebb & password?
f. then done right?

any extra steps that i missed out?

please help to see see, thank you much!

thanks bro!

why ax3 pro cannot have own ssid under repeater mode? so for the repeater mode, ax3 pro acts as a mesh node like that?

cannot understand, cause i have tp link wifi repeater, i can set another ssid for devices to connect it.

but for ax3 pro, how we know whether our devices connected direct to modem or connected to ax3 pro? cause the ssid same name only...

previous contract rm20 off per month expiring soon, called them to renew, they said the only available renew offer now is rm10 off per month for 12 months contract, is this the best offer? or retention team offers something better?