Sit down & relax, wait for the Installation

P/S :
-- Prepare power socket extension.
-- Get yourself some ideas where is the location you want to place your router, which area in your house is the critical areas that you want to have best performance.
-- Prepare yourself with the preferable cable route, and with some options.
-- During Installation, ask the SI what is the Fibre Reading before plug into the ONU (aka Fibre Modem).
-- During Installation, your Archer C1200 (if so) router is loaded with Firmware Build 20180502 rel.45702

Thanks.

Hi, which plan did you subscribed to?

For cable is fibre cable need to lay over the wall in your premise.
Either go through ceiling or through floor area there.

Thanks.

Hi , if yours is prelaid fibre building, then there is no need to pull in additional fibre.

Thanks.

AX56U awesome... DL/UL can overhit 500Mbps most of the time... almost every corner of my place also covered now...
but i also used the DIR868L as repeater also at the back of the room... last time having no signal, now average can get 200mbps (5GHz) at the back room

yes, don't think the modem can be changed

Hello, only the router can be changed.
Do let me know if you need recommendation of routers.

Thanks.

Hello, may I know what's your budget?

Thanks.
For Huawei Modem, you don't need to do anything.

For Router, you need to get the PPPoE details ready.
For ID should be XXXX@timebb.

Thanks.

What's your plan speed and how big is your house?
ASUS AX56U

You mean 100Mbps and 952sqf?

Thanks.

Do you have Wireless AX Devices with you?

Thanks.

You mean Wi-Fi 6?

Devices support AC?

Thanks.