Same here, but after restart then ok

Try to reset your router.

Thanks.

Hi, have you  set in GoogleDNS in Dir882 ? How do you tell that yoir PC is not detecting the Google DNS?

Factory reset means reconfigure the router.

When did this happened?
Right after installation?

Thanks.

Is anything enable after you switch off the PCs?

Thanks.

Hi,

Check a few things --
1) In your Router, uder Advanced>DNS>set in your primary & secondary GoogleDNS servers. (Do you mean TIME guide you to set it up here ?)
2)make sure your PC is set to Auto obtain DNS Servers.

Thanks.

I suspect you are still using the default settings which is a combination of Google DNS & TIME default DNS 203.121.x.x

Please check it here :
http://www.whatsmydnsserver.com/

Thanks.

It's programmed in such a way TIME DNS as primary & GoogleDNS as secondary by default. Let's leave IPv6 alone temp, can you screenshot & pm me the settings for DIR882 under Advanced>DNS ?
I'm worrying that this setting is preset in the firmware, let's hope the Advanced DNS Settings can supercede the DNS settings in Connection settings.

Thanks.

Hi Bro,

Under Connection Setup, edit PPPOE Dual Stack, click on All Settings, under IPv6, slide it to the left to turn off Auto DNS, and then set in the followings into it.

2001:4860:4860::8888
2001:4860:4860::8844

Do the same as in Advanced > DNS settings (probably you have already done with TIME help earlier)

Click Apply, and Reboot the Router, try again.

Thanks.