Outline ·
[ Standard ] ·
Linear+
LCP terminated by peer (when download), utilise full 8mbps!
|
miloaisdino
|
Oct 4 2018, 03:34 PM
|
|
QUOTE(Anime4000 @ Oct 4 2018, 03:33 PM) Seriously... TM doing that? throttle and disconnect when using 8mbps bandwidth, what purpose then if dont allow 8mbps begin used It seems like pppoe issue. Could u try another router first to see if u get random pppoe disconnects as well? If not u have to lodge a complaint alr.. This post has been edited by miloaisdino: Oct 4 2018, 03:35 PM
|
|
|
|
|
|
miloaisdino
|
Oct 4 2018, 04:08 PM
|
|
Streamyx technician told me before there is an upper speed limit on the pppoe above the normal port cap 8000kbps. But never should it result in random disconnections tho...
|
|
|
|
|
|
miloaisdino
|
Oct 4 2018, 06:01 PM
|
|
QUOTE(Anime4000 @ Oct 4 2018, 04:28 PM) New log CODE 2018-10-04 15:55:01 [Informational] kernel: Link State: DSL link down. (port reset after live chat) 2018-10-04 15:55:01 [Informational] kernel: Link State: PVC_0 PPPoE down. 2018-10-04 15:55:25 [Informational] kernel: Link State: DSL link up. 2018-10-04 15:55:27 [Informational] syslog: Connect time 132.2 minutes. 2018-10-04 15:55:27 [Informational] syslog: Sent 7434745 bytes, received 19888530 bytes. 2018-10-04 15:55:27 [Informational] syslog: LCP down. 2018-10-04 15:55:27 [Notice] syslog: Connection terminated. 2018-10-04 15:55:27 [Informational] syslog: LCP down. 2018-10-04 15:55:35 [Notice] syslog: peer from calling number 04:25:C5:96:F7:63 authorized 2018-10-04 15:55:38 [Informational] kernel: #### wan_primary: [210.186.182.197]
2018-10-04 16:04:56 [Informational] syslog: LCP terminated by peer 2018-10-04 16:04:56 [Informational] syslog: Connect time 9.4 minutes. 2018-10-04 16:04:56 [Informational] syslog: Sent 2787612 bytes, received 6138219 bytes. 2018-10-04 16:05:03 [Informational] syslog: PPP session is 34458 2018-10-04 16:05:03 [Warning] syslog: Connected to 04:25:c5:96:f7:63 via interface nas0 2018-10-04 16:05:06 [Notice] syslog: peer from calling number 04:25:C5:96:F7:63 authorized 2018-10-04 16:05:10 [Informational] kernel: #### wan_primary: [202.188.214.120]
2018-10-04 16:08:27 [Informational] syslog: LCP terminated by peer 2018-10-04 16:08:27 [Informational] syslog: Connect time 3.4 minutes. 2018-10-04 16:08:27 [Informational] syslog: Sent 756473 bytes, received 4545884 bytes. 2018-10-04 16:08:34 [Informational] syslog: PPP session is 2870 2018-10-04 16:08:34 [Warning] syslog: Connected to 04:25:c5:96:f7:63 via interface nas0 2018-10-04 16:08:37 [Notice] syslog: peer from calling number 04:25:C5:96:F7:63 authorized 2018-10-04 16:08:40 [Informational] kernel: #### wan_primary: [175.144.163.69]
2018-10-04 16:10:57 [Informational] syslog: LCP terminated by peer 2018-10-04 16:10:57 [Informational] syslog: Connect time 2.4 minutes. 2018-10-04 16:10:57 [Informational] syslog: Sent 845269 bytes, received 2434096 bytes. 2018-10-04 16:11:05 [Informational] syslog: PPP session is 26095 2018-10-04 16:11:05 [Warning] syslog: Connected to 04:25:c5:96:f7:63 via interface nas0 2018-10-04 16:11:08 [Informational] syslog: Remote message: Authentication success,Welcome! 2018-10-04 16:11:08 [Notice] syslog: peer from calling number 04:25:C5:96:F7:63 authorized 2018-10-04 16:11:11 [Informational] kernel: #### wan_primary: [1.9.188.139]
I feel like that, but, why throttle if we pay and use the subscription, no use. but Unifi use PPPoE, so PPPoE just mean for virtual Ethernet, just like PPTP, L2TP, SSTP, OpenVPN I feel their DSLAM problem Wait i think i know alr.. i think someone stole your pppoe account, hence everytime after session keepalive interval will proceed to reconnect. Tell tm to change your pppoe password immediately. 8mbps account holders pppoe account are very attractive Is your remote management on? If u forget to hide your speedtest ipaddress and can access web admin from wan interface, then your account can be easily stolen This post has been edited by miloaisdino: Oct 4 2018, 06:06 PM
|
|
|
|
|
|
miloaisdino
|
Oct 4 2018, 07:25 PM
|
|
QUOTE(Anime4000 @ Oct 4 2018, 07:20 PM) I using Asus DSL-AC52U, no remote mgmt enable, and password is strong. using Riger DB102 (old) speed become 5mbps using Riger DB102WL (new) speed is fast, same problem, disconnect. apply to modem (bridge) + router/pc, disconnect when full speed for 8 to 20 minute Lol must be dslam then
|
|
|
|
|
|
miloaisdino
|
Oct 4 2018, 07:38 PM
|
|
QUOTE(Anime4000 @ Oct 4 2018, 07:35 PM) Lol... you see my twitter to @helpmeunifi : https://twitter.com/helpmeunifi/status/1047811209884393474this happen when Unifi surrounding? I live in the middle where no unifi... TM sabotage it's own customer? Lol. Try http://miloiot.mlCheck yr address, is the line rated for 10mbps (adsl) or 8mbps?
|
|
|
|
|
|
miloaisdino
|
Oct 4 2018, 09:04 PM
|
|
QUOTE(Anime4000 @ Oct 4 2018, 07:40 PM) it's 10 Mbps [attachmentid=10055024] Lol Yr dslam id abit diff, maybe unifi lite coming to yr area soon? This post has been edited by miloaisdino: Oct 4 2018, 09:04 PM
|
|
|
|
|