MB_XX

MB_00: Battery Capacity - Current battery charge
MB_01: Battery Charge Status - Charging or discharge (work type status)
MB_02: Charging Type - Charging type (fast, medium etc)
MB_03: Battery Voltage - What voltage battery now. (Example: if you have 4039568 that mean 4.03v)
MB_04: Battery Current - How much voltage your device use in real time
MB_05: Battery Temperature - Real time battery temperature (Example: 309 that mean 30.9)
MB_06: Battery Status - Battery Health (excellent, good, great etc)
MB_07: Charger Chip Temperature - Charger adapter temperature (Example: 309 that mean 30.9)
MB_08: Current level of thermal control - Didn't work correct, must show peak temperature when device must disable charging or power off.
MB_09: Maximum current FCC (Full Charge Capacity) - Maximum voltage battery if battery fully charged

MU_XX

MU_00: Type of charger - What you use for charging now (Example: Charge adapter or PC USB)
MU_01: Type-C current mode - On charge adapter with QC 3.0 write 3 stage charging in voltage (12, 9, 5) in this section you will see what mode your device using now (fast, medium, default etc)
MU_02: CC (Charge Capacity) output direction - Charging device via USB, or device via device (Example: type 1 or 2, if you charge battery you will see 2, if you use reverse charge - show 1)
MU_03: Maximum input current USB - Max input voltage via USB
MU_04: USB status in position - Current voltage in usb

MP_XX

MP_00: Inclusion of a slave charger case - Connect charger or no
MP_01: Proportion of the current allocated by the slave device (Charger) - How much volt phone get from charger
MP_02: Maximum current FCC (Full Charge Capacity) - Max voltage from charger during one charge sesion
MP_03: Charging status of the slave charger - Charging adapter status (health)
MP-04: Maximum current slave charger - Max Voltage from charge adapter to device, during one charge sision

MF_XX

MF_00: Internal resistance of the battery - Resistance on Battery
MF_01: Actual feedback on battery capacity from charge level sensor - Actual charg level in % if this parameter didn't compatability with MB_00, try make factory reset or visit nearest service center for cheking your battery.
MF_02: Battery cycle - How much battery charging cycles, Fully charge from 0% to 100%
MF_03: Battery contact resistance - Contact battery resistance on motherboard
MF_05: Actual capacity (the one left from the factory capacity)
MF_06: Notified Capacity (factory battery capacity from manufacturer)


MM_XX

MM_00: Result of AICL (Adaptive Input Current Limit)
MM_01: USB input current
MM_02: maximum charging voltage of the main charger
MM_03: maximum current FCC (Full Charge Capacity)