Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 fully synthetic

views
     
Alan Andrews
post May 21 2018, 01:25 PM

Getting Started
**
Junior Member
72 posts

Joined: Nov 2017
QUOTE(delsoo @ May 19 2018, 07:36 PM)
Regarding with the coolant part, should I change the coolant? I am not sure it's 100% coolant inside the radiator..... I heard that using the water will cause the radiator to rust.....?
*
All new Protons are filled with 100% coolant in the radiator before they leave the factory.
For best results you should only refill 100% coolant. Do not dilute with distilled water, etc.

There is no need to flush the radiator too often. (Just do it once every 5 years or 60k km whichever comes first)
As a rule of thumb, just flush the radiator when you change the timing belt/water pump.
Btw, you will need many bottles of coolant for this. Around 4-5 bottles I think. laugh.gif

Otherwise, just top up the coolant (if necessary) during the regular scheduled service. smile.gif



Alan Andrews
post May 21 2018, 01:29 PM

Getting Started
**
Junior Member
72 posts

Joined: Nov 2017
QUOTE(delsoo @ May 19 2018, 05:26 PM)
guys , what's the difference between liqui moly toptec ? synthoil  ? molygen ? they are all fully synthetic oil , right ? I'm looking for fully synthetic oil now for my persona ... Or any brand suggestion for fully synthetic oil ? I have been using shell helix semi synthetic all this while , i can feel the engine sound is quite rough
*
Btw, for engine oil, the best choice is Petronas Syntium 800 10W-40 (Synthetic blend).
This is the engine oil recommended by Proton. It may be slightly thick but it suits the Campro engine. laugh.gif



This post has been edited by Alan Andrews: May 21 2018, 01:29 PM

 

Change to:
| Lo-Fi Version
0.0130sec    1.03    6 queries    GZIP Disabled
Time is now: 15th December 2025 - 02:52 PM