Some how I manage to get it for green light.. But same thing no Internet connection..

Eth 2_1
Mtu 1942
Manage to get green light
Back to page one..

But unable to browse Internet.. Omg..

This is the current setting for my d link router
Green light for the moment.. But I unable to access to the Internet..

Try change IP Protocol to IPv4, and Service Type to Internet_VOIP.
If you have friend using Maxis Fibre, bring the router over to test.

Is the VoIP issue resolved? If yes, what was the solution?

Any idea to resolve this issue ? My voip still unable to use recently. Thank

No solution yet. If you need to use VOIP, you need to use back Maxis router.

Really sad for this, I just manage replaced maxis router with netcomm..


The ping is really improve alot for VDSL2


maxis
Kindly provided us the configuration for the latest VOIP setting.
Thank you

This post has been edited by lwk523: Jul 8 2018, 12:35 PM

For those who were facin issues with internet every 48 hours, yes its maxis settings server side they will somewht reboot your internet everybody 48 hours. But why your router didn't reconnect I can't confirm. My ASUS RT-N12HP ok with this.

Any news on how to configure VOIP with this router? I bought this router, and I want to still use the home phone.

This post has been edited by AngryFood: Jul 23 2018, 09:59 AM

I highly suspect u need both vlan 821 and 822 for the phone VOIP to work, as per blog using tomato router
Vlan 821 is for TR069, the so called remote management also serve as backdoor for hacking of your router...duno why maxis insists on enabling it,

if you still trying to use this router to connect the Maxis Fibre.
You don't need the TM BTU.
Just plug the phone line to the Dlink router.
Use quick setup and select Maxis Fibre.
Then just enter your username and password without changing anything.
Proceed until it reboot.
After that go to Status > WAN > Network.
If the VDSL_1_1 showing connected mean you can start using internet.
Do note that currently, the VOIP don't work on this dlink router.

Reached out to Maxis,
Server: homesip.maxis.com.my
Outbound: bvgw03.maxis.com.my

VOIP still doesn't work on this D-Link Router.

Based on D-Link Support, they are aware of this and do not have a solution yet.
I had bad experience with D-Link but still bought this just because it says it 'supports' Maxis VOIP. Hope to see good news here soon!

To me, although the VOIP not working, the internet is much more better than the TM BTU + Maxis Router using this.

Yes buddy, definitely less annoying than the default one which kept freezing.
The VoIP is required for an antique alarm system to work so I need that

Anyways, I made some noise, and someone from D-Link just called up and said will 'test' some workaround in their lab. Will share if they give me something worth sharing here.

My one is even worse.
1. Voip not working.
2. DDNS not updating even public ip address changed.
3. The router is ok after setup, but few weeks later, it jammed after TNB power failure. And power cycles does not solve the problem. The symptoms are wifi connection failure, no login page at 192.168.1.1 on wired LAN.

The only solution i can found is to reset the router, and load back the configuration (which i saved during the router setup months ago.)

This post has been edited by fsyap73: Aug 6 2018, 04:58 PM

I guess it's safe to say that I got scammed by D-Link for a VoIP function that doesn't work
Still, keeping my finger crossed if any of us manage to get it working...
- VoIP still not working for me.
- D-Link folks' so-called lab test hasn't even returned to me until today.
- DDNS is not working for me even after I called up Maxis to get public IP.
- WiFi crashes from time to time and requires a manual restart to get it working.


In my other house, I am running Maxis on EdgeRouter X + UAP, doesn't have VoIP but at least I don't remember having to reboot the router for 2 years+ and I have the uptime reports of constant disconnections by Maxis (will use them in case the disconnection gets annoying )

Hey guys,

Recently i also discover that my physical SIP phone which connect directly to maxis data vlan doesn't work anymore. I'm using pfsense as router which i can untagged the vlan 821 or vlan 822 to test on my laptop with X-lite sip client. I could get ip address starting with 10.x.x.x with vlan 822 and can ping to the proxy bvgw01.maxis.com.my, however could not get the sip client to register. Just fyi, if untagged vlan 821, i could not get any ip address at all on my laptop.

This post has been edited by erict68: Aug 6 2018, 05:08 PM

Believe Maxis only allowed VOIP connection thru it own router.
Any VOIP connection from 3rd party device is not working at the moment.

No. D-link does not scam you on the VoIP function.
It did work until recently. I believe first report that VoIP function not working anymore is in end of June.
Something that Maxis or possible that TM did to prevent 3rd party router using the VoIP.

The D-Link WiFi does sucks as usual. What I do, i didn't enable the WiFi nor attach the antenna on the D-Link.
Instead, I connect a TP-Link router to it just for WiFi and very happy with it.