ic, whats the thickness u need? check your nail length.

Need about 2cm thick

ic 20mm is around the standard thickness.

color of the wood any issue? malaysia wood is usually medium brown.

Color no issue

PM Received & Replied. Ya, Aluminium now a day really expensive. Although wood aren't cheap too.

You can use 0.5x2 or 1x3, quite nice also .

Ohh, we dont sell such wood , as this wide is for bigger project, usually min length is 16 feet up. You can join it by using few pieces of 1x3 or 1x4.

something like this, but you can also not to join.






Is the glue last longer ?

2cm is just nice, this is the common size we cut. ⅞" , nearly full 1".

Bro, will the wood bend over time because of the thickness? because it going to be really long (joint to become 30 feet long)

Hi, ya, the chances to bend is high if the thickness are so thin, especially Balau.

It can be avoided by cutting it from a really big log or air dried for a period.

Then i think not wise to use it as ceiling decoration, if sekali bengkok, habis my plaster ceiling.

If join like that wil be loose or nt ? How much is it to join like that up to a4 size?

Any idea can custom made this cabinet ?

Nope mate, usually it wont bengkok if you air dried it properly. Bengkok only happen when extreme heat and not properly air dried.

Quite tight actually, but if you pull it out still will loose.

You will need 1 pieces of 3 feet then cut it to join together.

Is the air drying process carry out by your factory? Do i need to appoint some other workshop to do it for me?

Oh I have to cut myself? I tot ur place got offer cutting service also

yes, glue is quite strong if small piece like a4 paper size.

but if large table top. can put some big dowel to make it stronger.

Sorry for late visit, my office internet line just become normal after repairing


How strong of this ?

quite strong for normal use.
but can change to solid wood dowel also.

Here is some very nice idea from MGM Macau , the size and length used is very affordable.

I c , thanks for your information.