I tried that... Set to bridge the Internet terus tak blink for me... Fucking shit. Man...Only can use my router as a repeater now

update :
by default the ZTE itself have a Vlan under BR_vlan_600 need to enable this and don't kacau . its vlan id should be 600 as well

then Vland trunk tab.
the lan port i.e: lan 1 that u bind to the wan at router. need to set te support vlan number to be 2, then it will pop up two vlan id:(vlan id1 & vlan id2) these two shall then be set as 500 & 600. PVID set to 600.

then it is all good..
internet via own router--OK
hypptv via lan 3 or 4 of ur own router --ok

Received ZTE H267A today. What I did after the installer completed the installation.

At Internet > WAN > DSL tab > DSL Connection
1. Create new item (Internet bridge VLAN)
- Connection name: BR_VLAN_500
- DSL Transfer mode: PTM
- VLAN: On
- VLAN ID: 500
- Apply

2. PPPoE set to Off

3. Click VLAN Trunk tab
- LAN1 set to On
- Supported VLAN number: 1
- VLAN ID1: 500
- PVID: N/A
- Apply

4. Once done connect own router WAN port to ZTE LAN1. HyppTV connect to ZTE default LAN4

Optional>>
5. If you want to pass the HyppTV to own router then
- At DSL connection > BR_VLAN_600 set to On (default is On)

6. At VLAN Trunk
- LAN1 set to On
- Supported VLAN number: 2
- VLAN ID1: 500
- VLAN ID2: 600
- PVID: N/A
- Apply

2 minor observations. I will try to fix it when have time.
1. ZTE system time not sync with time server. Suspect it can't pick-up internet traffic
2. Internet LED is off. Should be related to above