Hello all, Thank you for the great thread. I am trying to help my Malaysia office with their static IP and their upgrade to TM 100/50 Fiber. The technicians put in a new wireless router and I didn't know how the old one was configured so we're no longer getting a DHCP address of our public IP to our firewall. I have tried everything listed in this thread but I cannot get our Cisco ASA to connect via PPPoE. I tried to bridge the whole ZTE router as well as the instructions in here.

Hardware Topology:
Alcatel-Lucent I-240G-P ONT
ZTE ZXHN H267A
Cisco ASA 5505

Our previous TM device would give us our static public as a DHCP lease. Any suggestions would be welcomed. I assumed their wireless router did the PPPoE connection and then would hand it off on LAN-1. I also tried to bypass and go straight in the I-240G-P ONT and do the PPPoE in the ASA with VLAN 500 on the outside interface with no success.


*Edit*

Right now I am doing a static DHCP to the MAC of the Cisco ASA and doing a 1 to 1 NAT to accomplish what I need for right now (Site to Site IPSEC VPN) but i would really like to get any firewall out of the way between my firewall and the ISP.

This post has been edited by jas0nmack: Apr 30 2018, 01:23 PM