Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

Tech Support ZTE H267A Modem + Router Unifi

views
     
[JackAss]Uncletan
post Dec 17 2017, 10:20 PM

Getting Started
**
Junior Member
75 posts

Joined: Jan 2003
Hi all,

need help.

I have this ZTE (ZXHN-H267A). How do i use it with my DIR-850L router? i try connecting it to LAN1 and try setup on the DIR850L as DHCP but it failed to detect.

Can advice sifus?
[JackAss]Uncletan
post Dec 17 2017, 11:11 PM

Getting Started
**
Junior Member
75 posts

Joined: Jan 2003
Problem solved with Patrick Toh steps... TQTQ
[JackAss]Uncletan
post Nov 15 2018, 11:09 PM

Getting Started
**
Junior Member
75 posts

Joined: Jan 2003
Hi all sifus,

I follwed all the steps shared by Patrick but somehow i cant get my new asus rt ac68u to work...anyone using this model and manage to get theirs to work? Mind sharing with me?
[JackAss]Uncletan
post Nov 16 2018, 12:09 AM

Getting Started
**
Junior Member
75 posts

Joined: Jan 2003
Hi All Sifus,

Where can i obtain the Special Requirements from ISP settings?
example:
Enable VPN + DHCP Connection: Yes? or No?
Hostname:?
Mac Address: ? (can this be obtain from inside the ZTE Router page?)

[JackAss]Uncletan
post Nov 16 2018, 11:59 PM

Getting Started
**
Junior Member
75 posts

Joined: Jan 2003
Hi All Sifus,

I got it sorted out.

Changes done was to LAN > IPTV > select ISP Type > Unifi Home and press apply and reboot the router. Wolla it worked. Why and How i am not sure.


[JackAss]Uncletan
post May 28 2020, 05:21 PM

Getting Started
**
Junior Member
75 posts

Joined: Jan 2003
hi all sifu,

I've been using my old ZTE H267A with Asus RT-AC68u till the ZTE gave problems and was replaced to NETIS DL4480V1 today. I am having trouble to reconfigure it back to the method i did with ZTE H267A and Asus RT-AC68u.

Any sifu has gotten their Netis DL4480v1 and Asus RT-AC68u working? Please share what you did.

Things's I've done.

In NETIS DL4480v1:

- under PTM WAN
- under VDSL_Connection_1
> Channel Mode: changed from PPPoE to Bridged
> Connection Type: Internet
> VLAN ID: 500
> Port Mapping: Lan 1 ticked
> MTU: from 1500 to 1492
> IPv4 TCP MSS: 1452
> IPv6 TCP MSS: 1432

- under WLAN Off for both 2.4 and 5 settings.
- then i apply changes and restart the NETIS DL4480v1.
- then the LAN 1 cable from NETIS DL4480v1 connect to Asus RT AC 68u
- that is where problem start.
- i can't connect to 192.168.0.1 any longer it says no internet connection.
- asus router i've resetted my old previous settings.

then when i try to connect back to my NETIS DL4480v1 - i can't.
so i had to press reset button 20secs then only i can.

any idea where i did wrong?

i saw there is WAN settings in NETIS DL4480v1 with pppoe@ccs < should i put mine instead?

please advise sifus!

[JackAss]Uncletan
post May 28 2020, 06:33 PM

Getting Started
**
Junior Member
75 posts

Joined: Jan 2003
QUOTE(miloaisdino @ May 28 2020, 06:06 PM)
the lan port of netis should connect to wan port of asus. configure pppoe login on the asus. also disable dhcp on the netis to be safe
*
Hi Miloaisdino sifu,

Yes i did that, the LAN1 Port of Netis connect to the WAN Port of Asus Router. I've already configured the PPPOE logon on the asus router but still not working. But i notice in the Netis, there is Ethernet WAN - all down, then PTM WAN - the changes i did, then there is this DSL WAN within the PPPoE@CCS username and password i can't see is being setup and it has a status of UP. not sure if i disable this is disabling the DHCP? or i may be wrong.


[JackAss]Uncletan
post May 28 2020, 07:36 PM

Getting Started
**
Junior Member
75 posts

Joined: Jan 2003
Hi All sifu,

end up settled myself after 3hours plus trial and error -.-

same method applied like ZTE but slight difference.



 

Change to:
| Lo-Fi Version
0.0176sec    0.45    7 queries    GZIP Disabled
Time is now: 11th December 2025 - 01:03 AM