Initial results...2 hours of clocking.....

let pictures do the talking .....who wants to guess the chipset ?





2.3Vdimm

Bios 0207

Intel P965 right?

You want us to guess the chipset for the ram or chipset for the motherboard?

I think its the RAM's chipset eh. Let me start. Hynix S5?

got any prizes?

its d9gmh

erm...hynix fp-y5 maybe?

or d9?

This post has been edited by fo33il: Apr 1 2007, 09:58 AM

D9GMH on a DDR2-533 KVR
if not.... maybe a D9GCT

quite sure it should be those Kingston's batch with D9GMH chippy

im correct??

ddr1100 cl 5-4-4-5
micron D9GCT or GMH

he is overclocking his RAM or CPU?

aiya.. i think better u read summore la about this topic..
uh.. its D9GMH kot.. i think..

This post has been edited by serez: Apr 1 2007, 11:44 AM

wah kingston value ram ddr2 533 can clock ddr2 1100
so lucky one laa u.....
i guess its D9 chip

aiya... me noob bout ram lar... nvm, wanna change urs with mine??? hehehe... juz kiddin... i guess micron d9 family???

just saw a pair of kingston kvr 533 with D9GMH
do ddr1080 4-4-4-12

i think is D9GMH .......

ok TS, now ur turn to clarify. dont tell us that chip is hynix chip.

it's kingston chip...

.. or izzit epilda??

looks like D9GKH, current KVR's I've seen are using that if you're lucky to find. Saw a few over at The Curve a couple weeks back

If Kingston 533, then its not a HyperX hi-pef RAM.
Should be D9GMH or D9GCT maybe
Saw some SG guy selling it b4.

yaww br0, how bout ur great crucial. can it do the same??

Hi bro,
Mine so far is 1050MHz 4-4-4-10 with 2.22v
TS's using PC4200, mine is PC5300. His Kingston clock faster than mine.

---

Added on April 1, 2007, 6:12 pmThe timing is 5-4-4-5 rite, i think we only can get this kind of timing with software tweaking.. quite impossible to do it with BIOS or boot sucessful with this timing i guess

This post has been edited by yehlai: Apr 1 2007, 06:26 PM

^ yeahh, his timing was tight

what if u feed more vdimm, izzit possible to do the same??

Impossible to boot with 5-4-4-5 timing even clock at 667MHz.
Becoz my mobo can do Trc 8 only, can be lower than tht lol. unless i tweak with MemSet.

This post has been edited by yehlai: Apr 1 2007, 06:53 PM

ok lol...most of you correct ... its D9GMH...got it off a good friend working in a shop...

will post a better result in a couple days or so...these few days very busy


I didn tweak much with software...unless you count lower timings tweaking in memset

sorry I didn make myself clear.. guess the chipset for ram

This post has been edited by XTimX: Apr 1 2007, 09:22 PM

I knew it is D9GMH,

ok, since we have the answer already... stop the spamming (guessing).

lol actually Id rather trade my GMH for FP-S5 hynix...that one even better

ur saying FP-S5 is better than D9GMH, why?

Well, as far as I know, not all FP-S5 are highly overclockable...there are certain revision than overclocks quite well, and other revisions are just average clockers.

ya,i still remember the nakata selling is different batch of FP-S5 compared to the link to the Twinmos one,the twinmos S5 is rocking,while the bro nakata one i dont know lo...even it's same chip but it doesnt mean it can clock the same result.
Anyway,i think D(GMH is great since it can go beyond 1KHz in low vdimm and tight timing.

did you try CL3 timing? currently i am running at CL3 667 at 2.0vdimm. Using the same ram as TS

I dint chenge timing for 667MHz, becoz oc'ing the proc.
1002MHz 3-4-4-10 2.2v
1050MHz 5-5-5-12 2.22v

...... I guess is either 2 type of RAM Chips base on Micron D9xxx Series or Hynix FP-S5 or FP-Y5 Chipset...... some more can get the thru that 1100Mhz......

The one that nakata sells is FP-S5 Revision A.
The twinmos is FP-S5 Revision B.

I've used the FP-S5 Revision A before, and seriously, it's not a good overclocker at all.

Even if on stock speed but on 4-4-4-12 timing also need 2.2Vdimm.

Higher clock speed?
Don't bother, it's not overclockable at all.

well my FP-C4 does 880 mhz 3-3-3-4 leh.... FP-C4 another god chip imo.....that time pump 3.3v still alive.... very cool at that voltage as well.... ( the OC I used 2.4V though )

FP-Y5 you must get rev B...rev C a bit harder to clock

---

Added on April 6, 2007, 9:16 pm


tweaked it a bit more....bit lazy to tweak the settings in memset but this is roughly the max this ram can go

This post has been edited by XTimX: Apr 6 2007, 09:17 PM