Hello @honkkydorry ,

We do have a type of anti slip coating that can be applied directly on tiles with normal roller. Colour and roughness can be adjusted as well. Can last at least 5 years.

It is called tile coat.

Thanks

1. Not needed.
2. Just use a roller and directly apply on clean and dry tile surface.
3. Easier to wash than tiles.
4. 2 layers is recommended.
5. Wear and tear we cannot guarantee, however it should not become slippery as it is silica based. If it wears up you may just lay another layer.
6. Nope. Consultation is free
7. Pricing is almost RM1.00 / sqft (Material Price)

It is relatively fungus resistant.

Yes a full day is needed to be fully cured. We also have the flakes coating as well if you want.
Most importantly, you can DIY yourself.

This is one of the sample in our showroom.

Flakes is definitely better as it can provide smooth surface (covers groove lines). However it need a primer, then flakes, then a last clear coat to seal it up. It will be more expensive and thicker, but the aesthetic look is very nice.

Tile coat however, is easy to apply, just using a conventional roller is enough. The groove lines however, need to be filled using putty to provide a smooth surface.
It is cheaper as well and maintainance is relatively easy.


Regarding waterproofing performance, we recommend to lay a layer of cementituous waterproofing as base to enhance waterproofing properties.

Yes we do have the solution. One of the easiest way doing it is to lay cementitious waterproofing as base then top coated with any type of coating or material (eg: clear coat, tile coat, tiles, etc).

It should last for at least 2 years as we provide 2 years material warranty.

The best thing is you can do it yourself.

This post has been edited by bmcoating: Jun 30 2017, 10:16 AM